Flasher For High And Low Value Markers - Microtek ScanMaker i700 User Manual

Preview window
To use the Zoom scale:
Click on the Zoom scale from the bottom of Preview window. From the
drop-down menu that appears, select your zoom or magnification level.
Zoom-out
This lets you reduce a zoomed-in or magnified image one level down with
each click, up to the minimum 100% view.
Zoom-in
This lets you magnify or enlarge the image one level up with each time
you click, up to the maximum 1600% view.

Flasher for High and Low Value Markers

When the overview or prescan image is displayed, the High Value and Low
Value Markers are shown. If the two markers cannot be visually detected
with ease (depending on how your image may obscure the markers),
clicking the flasher activates the markers to flash a few times for easier
detection, allowing their locations on the overview or prescan image to be
seen.
Menu bar
The menu bar includes the different menus for setting up the scanner.
Scanner menu
file:///D|/sw56/adv_Preview_window_detail.htm (3 of 11) [8/15/03 3:59:29 PM]
To v
iew the status and technical information about your scanner