View Menu; Scanner Control; Lamp Control - Microtek ScanMaker i700 User Manual

Menu bar
2. Click the Remove Scanner button to delete the scanner
model from your scanner list.
3. Click the Close button to close the dialog box.

Scanner Control

This command lets you use some of the special features of your
scanner, such as lamp control.
Note: Not all scanner models support these features. If your
scanner model is not supported, the Scanner Controls command will
be grayed out in the Scanner menu.

Lamp Control

This the power-saving feature of the scanner lamp to save energy
and extend the life cycle of the lamp. By default, the lamp turns off
automatically if the scanner is idle for 15 minutes. You can change
the lamp idle time in your preferences or disable this feature
completely by unchecking the Auto Power Saving Mode check box.
Some scanner models allow you to turn the lamp off at once when
you click on the "Turn Lamp Off" button. If the "Turn Lamp Off"
button is always dimmed, it indicates that for the scanner model the
lamp On/Off state is automatically controlled by the software, and
user intervention is not required.

View menu

The View Menu includes the following:
Overview image or prescan image
Zoom In
Zoom Out
file:///D|/sw56/Menu_bar.htm (4 of 20) [12/16/03 11:57:50 PM]