Table of Contents
Advertisement
Quick Links
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
We advise you to read this manual carefully, as it contains all the instructions for maintaining
the appliance's aesthetic and functional qualities.
For further information on the product: www.smeg.com
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
il tuo prodotto tra le
migliori offerte di Cucine e Piani cottura
Table of contents
Smeg BG91IX9
o cerca
50
50
55
55
55
55
55
56
57
57
58
59
60
60
62
64
64
65
70
70
72
74
78
79
80
82
83
85
87
87
92
94
49
Advertisement
Table of Contents
Related Manuals for Smeg BG91IX9
Summary of Contents for Smeg BG91IX9
-
Page 1: Table Of Contents
5.2 Electrical connection 5.3 Instructions for the installer TRANSLATION OF THE ORIGINAL INSTRUCTIONS We advise you to read this manual carefully, as it contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com... -
Page 2: Instructions
Instructions 1 Instructions • Keep children under the age of 8 away from the appliance when it 1.1 General safety instructions is in use. • Cleaning and maintenance must Risk of personal injury not be carried out by • During use the appliance and its unsupervised children. - Page 3 Instructions • Do not insert pointed metal • Switch off the appliance objects (cutlery or utensils) into the immediately after use. slots in the appliance. • DO NOT MODIFY THIS • Do not pour water directly on very APPLIANCE. hot trays. •...
- Page 4 Instructions Risk of damaging the appliance • DO NOT USE THE APPLIANCE TO HEAT ROOMS FOR ANY • Do not use abrasive or corrosive REASON. detergents (e.g. scouring • Do not spray any spray products powders, stain removers and near the oven. metallic sponges) on glass parts.
- Page 5 Instructions • If any liquid does boil over or spill, • Do not use steam jets to clean the remove the excess from the hob. appliance. • Take care not to spill acid • Do not use rough or abrasive substances such as lemon juice or materials or sharp metal scrapers.
- Page 6 Instructions Installation For this appliance • THIS APPLIANCE MUST NOT BE • After use, turn off the plates. INSTALLED IN A BOAT OR Never rely solely on the CARAVAN. cookware detector. • The appliance must not be • Supervise children carefully as installed on a pedestal.
-
Page 7: Manufacturer Liability
Instructions 1.2 Manufacturer liability 1.5 This user manual The manufacturer declines all liability This user manual is an integral part of for damage to persons or property the appliance and must therefore be caused by: kept in its entirety and within the user's reach for the whole working •... -
Page 8: How To Read The User Manual
Instructions • Deliver the appliance to the 1.7 How to read the user manual appropriate recycling centre for This user manual uses the following reading electrical and electronic conventions: equipment waste, or return it to Instructions the retailer when purchasing an General information on this user equivalent product, on a one for manual, on safety and final... -
Page 9: Description
Description 2 Description 2.1 General Description 1 Upstand 6 Door 2 Cooking hob 7 Fan 3 Control panel 8 Storage compartment 4 Light bulb Rack/tray support frames 5 Seal... -
Page 10: Cooking Hob
Description 2.2 Cooking hob Power draw in booster function Zone Outside diameter (mm) Max. power draw (W)* (W) * 1300 1400 2300 3000 2300 3000 Power levels are approximate and can vary according to the pan used or the settings made. •... -
Page 11: Control Panel
Description 2.3 Control panel 1 Programmer clock 4 Function knob For displaying the current time, setting The oven's various functions are suitable for programmed cooking operations and the different cooking methods. After selecting minute minder timer. the required function, set the cooking temperature using the temperature knob. -
Page 12: Other Parts
Description 2.4 Other parts 2.5 Available accessories Shelves Rack The appliance features shelves to position trays and racks at different heights. The insertion heights are indicated from the bottom upwards (see 2.1 General Description). Interior lighting The appliance’s interior lighting comes on: Useful for supporting containers with food •... - Page 13 Description Deep tray Not all accessories are available on some models. The accessories intended to come into contact with food are made of materials that comply with the provisions of current legislation. Useful for collecting fat from foods placed on the rack above and for cooking pies, Supplied and optional accessories pizzas and baked desserts.
-
Page 14: Use
3 Use Improper use Risk of damage to surfaces Instructions High temperature inside the oven • Do not cover the bottom of the oven during use cavity with aluminium or tin foil sheets. Danger of burns • If you wish to use greaseproof paper, place it so that it will not interfere with the •... - Page 15 Glass ceramic hob High temperature inside the storage compartment during use 5. Place a pan full of water on each of the front cooking zones and switch them on Danger of fire or explosion to the maximum power setting for at •...
-
Page 16: To Save Energy
3.1 To save energy 3.2 Using the accessories • Preheat the appliance only if the recipe Racks and trays requires it. Racks and trays have to be inserted into the • Unless differently stated on the package, side guides until they come to a complete defrost frozen food before placing it in stop. -
Page 17: Using The Hob
3.3 Using the hob To see whether the pan is suitable, bring a magnet close to the bottom: if it is attracted, On first connection to the electrical the pan is suitable for induction cooking. If mains, an automatic check will be you do not have a magnet, you can put a carried out that will switch on all small amount of water in the pan, place it... - Page 18 Cookware recognition Limiting the cooking duration When there is no saucepan on a cooking The hob has an automatic device which zone or if the saucepan is too small, no limits the duration of use. energy will be transmitted and the symbol If the cooking zone settings are not changed, the maximum duration of will appear on the display.
- Page 19 Advice on energy-saving Power levels • The diameter of the base of the pan must The power in the cooking zone can be correspond to the diameter of the adjusted to various levels. The table shows cooking zone. the levels suitable for various types of cooking.
- Page 20 Heating accelerator Booster function Each cooking zone is equipped The booster function allows the with a heating accelerator that cooking zone to be activated at allows the maximum power to be maximum power for as long as 5 delivered for a time that is minutes.
- Page 21 Power control Control lock The hob is fitted with a power control The controls lock is a device that module that optimises/limits consumption. If protects the appliance from the overall set power level exceeds the accidental or inappropriate use. maximum limit permitted, the electronic circuit board will automatically manage the 1.
-
Page 22: Using The Storage Compartment
3.4 Using the storage compartment Functions list The storage compartment is at the bottom of Static the cooker. To open it, pull the handle As the heat comes from above and towards you. It can be used to store below at the same time, this system cookware or metallic objects necessary is particularly suitable for certain when using the appliance. - Page 23 Small grill (on some models only) Fan with grill Using only the heat released from The air produced by the fan softens the strong heatwave generated by the central element, this function the grill, grilling perfectly even very allows you to grill small portions of thick foods.
-
Page 24: Cooking Advice
3.6 Cooking advice General advice This function is particularly suitable • Use a fan assisted function to achieve for cooking on a single shelf with consistent cooking at several levels. low energy consumption. • It is not possible to shorten cooking times It is recommended for all types of by increasing the temperature (the food food, excluding those that can... - Page 25 • With the Grill function, we recommend Advice for defrosting and proving that you turn the temperature knob to the • Place frozen foods without their maximum value near the symbol packaging in a lidless container on the first shelf of the oven. optimise cooking.
-
Page 26: Programmer Clock
3.7 Programmer clock Setting the time If the time is not set, the oven will not switch on. On the first use, or after a power failure, the digits will be flashing on the appliance’s display. 1. Press the keys at the same time. - Page 27 Timed cooking 6. Press the keys at the same time to reset the programmer Timed cooking is the function which allows a cooking operation clock. to be started and then ended after a specific length of time set by the It is not possible to set a cooking user.
- Page 28 Minute minder timer 3. Use the key to set the required minutes. The minute minder timer does not stop the cooking operation but 4. Wait approx. 5 seconds without rather informs the user when the set pressing any key in order for the time has run out.
- Page 29 Cooking information table Weight Temperature Runner position Food Function Time (minutes) from the bottom (kg) (°C) Lasagne 3 - 4 Static 220 - 230 45 - 50 Pasta bake 3 - 4 Static 220 - 230 45 - 50 Roasted veal Turbo/Fan assisted 180 - 190 90 - 100...
-
Page 30: Cleaning And Maintenance
Cleaning and maintenance 4 Cleaning and maintenance Cleaning the surfaces To keep the surfaces in good condition, Instructions they should be cleaned regularly after use. Let them cool first. Improper use Risk of damage to surfaces Ordinary daily cleaning Always use specific products only that do •... -
Page 31: Cleaning The Hob
Cleaning and maintenance 4.1 Cleaning the hob Weekly cleaning Clean and maintain the hob once a week Cleaning the glass ceramic hob using an ordinary glass ceramic cleaning Light coloured marks from pans with product. Always follow the manufacturer’s aluminium bases can be easily cleaned off instructions. -
Page 32: Cleaning The Door
Cleaning and maintenance 4.2 Cleaning the door 3. To reassemble the door, put the hinges in the relevant slots in the oven, making sure Removing the door that grooved sections A are resting For easier cleaning, the door can be completely in the slots. - Page 33 Cleaning and maintenance Removing the internal glass panes 5. Remove the intermediate glass pane by lifting it upwards. For easier cleaning, the internal glass panes of the door can be removed. 1. Open the door. 2. Position the locking hooks in the hinge holes to prevent accidental closing of the door.
-
Page 34: Cleaning The Oven Cavity
Cleaning and maintenance 4.3 Cleaning the oven cavity Removing racks/trays support frames For the best oven cavity upkeep, clean it Removing the rack/tray support frames regularly after having allowed it to cool. enables the sides to be cleaned more easily. Avoid letting food residue dry inside the oven cavity, as this could damage the To remove the rack/tray support frames:... -
Page 35: Vapor Clean
Cleaning and maintenance 4.4 Vapor Clean • Pour approximately 40 cc of water into the tray. Make sure it does not overflow Vapor Clean is an assisted out of the cavity. cleaning procedure which facilitates the removal of dirt. Thanks to this process, it is possible to clean the inside of the oven very easily. - Page 36 Cleaning and maintenance Vapor Clean cycle setting End of the Vapor Clean cycle 1. Turn the function knob to the symbol 4. Open the door and wipe away the less stubborn dirt with a microfibre cloth. and the temperature knob to the 5.
-
Page 37: Extraordinary Maintenance
Cleaning and maintenance 4.5 Extraordinary maintenance 4. Slide out and remove the light bulb. Replacing the internal light bulb Live parts Danger of electrocution • Unplug the appliance from the mains. The oven is fitted with a 40W light Do not touch the halogen light bulb. - Page 38 Cleaning and maintenance Installing and removing the seal To remove the seal: • Unhook the clips located in the 4 corners and in the centre, then pull the seal outwards. To refit the seal: • Hook the clips located in the 4 corners and in the centre onto the seal.
-
Page 39: Installation
Installation 5 Installation Any wall units positioned above the worktop of the appliance must be at a 5.1 Positioning minimum distance of at least Y mm. If a hood is installed above the hob, refer to the Heavy appliance hood instruction manual to ensure the Crushing hazard correct clearance is left. - Page 40 Installation Appliance overall dimensions 900 mm 600 mm B - Class 2 subclass 1 min. 150 mm (Built-in appliance) 900 - 915 mm 750 mm 450 mm 900 mm Minimum distance from side walls or other flammable material. Minimum cabinet width (=A). C - Class 2 subclass 1 (Built-in appliance) The appliance must be installed by...
- Page 41 Installation Dimensions of the appliance: locations of Positioning and levelling gas and electric connections (mm) Heavy appliance Risk of damage to the appliance • Insert the front feet first and then the rear ones. • After making the gas and electrical connections, screw on the four feet supplied with the appliance.
- Page 42 Installation 3. Assemble the fastening bracket. Fastening to the wall The anti-tip devices must be installed in order to prevent the appliance from tipping over. 1. Screw the wall fastening plate to the rear of the appliance. 4. Align the base of the hook on the fastening bracket with the base of the slot on the wall fastening plate.
- Page 43 Installation 5. Align the base of the fastening bracket 7. Move the bracket onto the wall and with the ground and tighten the screws mark the position of the holes to be to fix the measurements. drilled in the wall. 6.
-
Page 44: Electrical Connection
Installation 5.2 Electrical connection Assembling the upstand The upstand provided is an Power voltage integral part of the product; it must Danger of electrocution be fastened to the appliance prior to installation. • Have the electrical connection performed by authorised technicians. The upstand must always be positioned and •... - Page 45 Installation The appliance can work in the following The aforementioned power cables modes: are sized taking into account the • 220-240 V 2~ coincidence factor (in compliance with standard EN 60335-2-6). Replacement U-bolt 3 x 10 mm² three-core cable. • 3220-240 V 3~ 4 x 4 mm²...
-
Page 46: Instructions For The Installer
Installation Access to the terminal board To connect the power supply cable, access Loosen the cable fastener screw to the terminal board on the rear cover: before installing the power supply 1. Remove the screws securing the lid to cable. the rear cover.