Gigaset R700 H PRO Manual page 9

Hide thumbs Also See for R700 H PRO:
Table of Contents

Advertisement

Charging the batteries
Charge the batteries fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The batteries are fully charged when the power
icon
disappears from the display.
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Switch the handset off if you are not using it for a couple of days.
If you are not using the handset for a couple of weeks, switch it off and remove the
batteries.
As soon as power is applied to the handset, a Setup wizard starts.
Setting the display language
Press the control key
on the display, e.g. English
You can also change the display language later on in the Settings
menu.
Select country
Press the control key
the device is highlighted on the display, e.g. Germany
the Display key OK
You can also change the country later on from menu Settings
Registering the handset (depending on the base)
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
On the base / On the router
Gigaset base:
Other base station/router:
until the language required is selected
press the display key OK
until the country in which you are using
Press and hold the Registration/Paging key on the base station
(approx. 3 sec.).
Information regarding the registration procedure
Documentation regarding your base/your router
Availability and operation of the functions
may differ on your telephone.
Getting started
7 h
Deutsch
English
Francais
United Kingdom
Press
Ireland
Austria
9

Advertisement

Table of Contents
loading

Table of Contents