Table of Contents
Advertisement
Show line status
Settings
Line
OK . . . The following status information is shown: Line Status, Line State, Call
Divert
Show more information (dependent on status):
Example: Line Status = Error, Details shows additional information on the type of fault
Status details are only updated when the relevant menu is accessed. If the status
changes during the display, the data is not updated.
Show status messages in idle display
Settings
Diagnostic
Line
Select On or Off
If a status display is enabled, relevant messages are shown in the idle
display. If there is more than one active message, the one with the
highest priority is shown, e.g. System error or Line error before Call
Divert active.
Fast access to numbers and functions
Assigning a number to digit keys (quick dial)
It is possible to assign a number from the directory to the keys
A number has not been assigned to the digit key.
Press and hold the digit key
or
Briefly press the digit key
The directory opens.
use
to select an entry
is saved to the digit key
If the entry in the directory is deleted later, this will not affect the assignment of the
digit key.
OK
Telephony
OK
Telephony
OK
Notifications
Save
Press the display key QuickDial
OK
use
Availability and operation of the functions
may differ on your telephone.
OK
Diagnostic
Details
OK
OK
System /
to select a number if necessary
Setting the handset
OK
Example
10:45
INT 1
3rd Aug
Call Divert
active
Calls
Calendar
and
to
.
OK . . . the entry
63
Advertisement
Table of Contents
