Table of Contents
Advertisement
Functions button
Setting up the "Alarm key" function
Trigger an action using the Functions button.
Settings
Activation:
On
When the earpiece or handsfree function is used for the call initiated:
Via
Select
Enable Spot LED:
Select LED blinking
Shorter and longer pressing of the Functions button can cause different actions to be trig-
gered. Configure one after the other the settings for short and long presses.
Select
Short key press / Long key press
Enter the phone number to which the alarm is forwarded:
Call to
Specify a delay time between pressing of the button and triggering of the alarm:
Alarm delay
Specify the alarm melody to be played on the handset after the Functions button is pressed:
Melody
Set the volume for the melody played:
Volume
Save the settings:
When the Functions button, configured as an Alarm button, is pressed
•
connections currently established for the base are ended
•
incoming calls are rejected
•
the handset plays the alarm melody over the speaker (if configured)
•
the Spot LED flashes in the SOS sequence (if enabled)
•
an alarm call is made to the number specified
38
OK
Display + Keypad
Function:
Alarm key
Earphone or Handsfree
On or Off
Enter the number or
Select the delay time
Select the melody
Select the volume
Save
Availability and operation of the functions
may differ on your telephone.
OK
Select On or Off each time
select it from the directory
Feature Key
OK
Advertisement
Table of Contents
