Table of Contents
Advertisement
Setting the handset
Dialling a number
Press and hold the digit key . . . the number is dialled immediately
or
Briefly press the digit key . . . the number/name (possibly in abbreviated form) is shown on
the left display key
Changing the digit key assignment
Briefly press the digit key
Change the assignment:
Delete the assignment:
Assigning display keys / Changing assignments
The left and right display keys have a function preset by default when in idle mode. The key can
be re-assigned.
Press and hold the left or right display key in idle status . . . the list of possible key assign-
ments is opened
changed
Possible functions: Alarm Clock, Redial, Handset Directory . . . More functions are available in
More Functions...
The availability of functions depends on the base.
Starting a function
With the telephone in idle status:
Testing DECT encryption
(depending on the base)
When this function is enabled, the handset tests whether the DECT connection to the base is
secure, i.e. is encrypted. If not, a message is shown on the display.
Settings
Change (
= enabled)
If a repeater without encryption is used, the secure connection test must be disabled.
If, on the base, encryption is disabled at a later time whilst the secure connection test is enabled
(because a repeater needs to be connected for example), Security Info - Press INFO is shown on
the handset.
Info . . . the situation is explained
64
press the display key . . . the number is dialled
Change . . . the directory is opened . . . possible options:
select an entry
Clear Key
select the function
Briefly press . . . the assigned function is executed
OK
System
Sec. off . . . the secure connection test is disabled
Availability and operation of the functions
may differ on your telephone.
OK
select a number if required
OK . . . The assignment of the display key is
OK
Security Check
OK
Advertisement
Table of Contents
