Gigaset R700 H PRO Manual page 62

Setting the handset
Assigning handsets to a connection (line)
(only on a CAT-iq router)
Multiple handsets can be assigned to a connection. Incoming calls to the number designated to
a connection will be forwarded to all handsets assigned to the connection.
Settings
select connection
displayed select handset
Permit/prevent multiple calls
(only on a CAT-iq router)
If the function is activated, multiple calls can be made in parallel.
Settings
select connection
Permit/prevent internal listening in
(only on a CAT-iq router)
If the function is enabled, an internal party can listen in to an external call and take part in the
conversation (conference).
Settings
select connection
Show system and line statuses
(only on a CAT-iq base, V2.1 and later)
Showing the system status
Settings
System OK . . . The System Status is shown (OK or Error)
When there is a system error, show information on the fault cause:
62
OK Telephony
OK Assigned Handsets . . . all registered handsets are
Change (
OK Telephony
OK Multiple Calls
OK Telephony
OK Listening In
OK Telephony
Availability and operation of the functions
may differ on your telephone.
OK Connections
= handset is assigned)
OK Connections
Change ( = activated)
OK Connections
OK Change (
OK Diagnostic
Details
OK
OK
OK
= activated)
OK