Epd Technology - Seiko C-16 Instructions Manual

B Type
・How to wear or take off the watch
While pressing the push button on the both sides
of the fl ap, pull the band out of the moveable lop
and fi xed loop. Then open the clasp.
6 Buckle
Fixed loop
Moveable
loop
154
C Type
While pressing the push button
on the both sides of the fl ap, lift
to open the clasp.
Push button
6
156
Place the tip of the band into the moveable
loop and fixed loop, and fasten the clasp
by pressing the frame of the buckle.
Push button
Flap
Pull the pins out of the adjustment
holes on the band. Slide the band
to the appropriate length. Place the
pins into the new holes on the band.
Fasten the buckle.
Buckle
Adjustment hole
Pins
・How to adjust the length of the leather band
While pressing the push button on the both sides of
the fl ap, pull the leather band out of the moveable
loop and fi xed loop. Then open the clasp.
Buckle
Push button
Fixed loop
Moveable Flap
loop
Pull the pin out of a adjustment hole of the band.
Slide the band to adjust its length and find an
appropriate hole. Place the pin into the hole.
Pin
Adjustment hole
Epd technology
・ T he principal components of electronic ink are millions of tiny microcapsules, about
the diameter of a human hair. Each microcapsule contains negatively charged
white particles and positively charged black particles suspended in a clear fl uid.
・ W hen a negative electric field is applied, the white particles move to the top of the
microcapsule where they become visible to the user. This makes the surface appear white at
that spot. At the same time, an opposite electric fi eld pulls the black particles to the bottom
of the microcapsules where they are hidden. By reversing this process, the black particles
appear at the top of the capsule, which now makes the surface appear dark at that spot.
Microcapsule
white particles
black particles
a few dozen μ ｍ
※ T he Electrophoretic Display may gradually deteriorate over long-term use. If you find a decrease in contrast or
readability of the display, contact the retailer from whom the watch was purchased and have the Electrophoretic
Display replaced with a new one. You will be responsible for the cost of replacement of the Electrophoretic Display.
Press the push buttons again to
unfasten the fl ap.
Fasten the fl ap.
6
155
Top transparent
electrode
6
Bottom electrode
157