Icom IC-78 Instruction Manual page 32

4
SET MODE
n
Quick Set mode items
• BK-IN
Selects the break-in type for CW operation.
There are three selectable values:
oF: No break-in operation (default).
SE: Semi break-in operation.
FL: Full break-in operation
• BK-IN delay
Adjusts the break-in delay time for the CW semi break-in operation. The delay
time is selectable from 2.0 to 13 (dots).
The default is 7.
• Key speed
Adjusts the CW key speed. Select a speed of 6 to 60* wpm.
The default is 20 wpm.
*40, 44, 47, 50, 52, 54, 56, 57, 59 cannot be selected.
• Key ratio
Selects the CW key ratio (or weight). Select a ratio between 2.8 and 4.5.
The default is 30 (3.0).
• RTTY mark tone
Selects the RTTY tone. Select 1275, 1615, or 2125 Hz.
The default is 2125 Hz.
• RTTY shift
Adjusts the RTTY shift. Select 170, 200, 425, or 850.
The default is 170 Hz.
• Dimmer
Selects the LCD back light brightness. Select Off, Low, or High.
The default is HI (High).
• Tuning step
Selects the tuning step for the Channel Selector's tuning.
The default is 1 k (1 kHz).
29
— (continued)
.