Table of Contents
Advertisement
RESET
SERVICE
LAN
1
2
3
4
ATTENTION!
Please make sure that the C 3050 LE is powered off or unplugged from the mains power source before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
1 BLUETOOTH ANTENNA TERMINAL
•
Connect one of the supplied antennas to this Bluetooth antenna
terminal.
2 SERVICE/RESET
•
SERVICE and RESET sections are for servicing purposes only. Not for
consumer use.
3 LAN
•
LAN connection must be setup for wired connection to be
established. Set up a Wired Ethernet broadband router with
broadband internet connection. Your router or home network
should have a built-in DHCP server to consummate the connection.
•
Using a standard straight-through Ethernet cable (not supplied),
connect one end of the Ethernet cable to the LAN port of your
wired Ethernet broadband router and the other end to C 3050 LE's
LAN port.
NOTES
•
NAD is not responsible for any malfunction of the C 3050 LE and/or
the internet connection due to communication errors or malfunctions
associated with your broadband internet connection or other
connected equipment. Contact your Internet Service Provider (ISP) for
assistance or the service bureau of your other equipment.
•
Contact your ISP for policies, charges, content restrictions, service
limitations, bandwidth, repair and other related issues pertinent to
internet connectivity.
4 WIFI ANTENNA TERMINAL
•
Connect one of the supplied antennas to this Wi-Fi antenna
terminal.
5 USB
•
Connect to this USB port a USB mass storage device formatted as
FAT32, NTFS or Linux ext4. The connected USB device appears as a
Local Source (USB) in the BluOS App.
•
Access and playback music stored in the connected USB device by
selecting "USB" from the BluOS App.
17
18
19
20
21
USB
5
6
7
8
9
10
11
IDENTIFICATION OF CONTROLS
12
13
14
DIRAC
•
Connect also to this USB port the assembled USB MIC Sound
Adaptor and Mic Assembly with Ferrite Base for Dirac setup and
calibration. For Dirac Live Setup guidelines, go to
support.nadelectronics .com and search for "Dirac Setup".
6 HDMI eARC
•
Connect to TV that supports HDMI Control (CEC) and Enhanced
Audio Return Channel (eARC) functions. HDMI CEC and eARC
functions are possible if external devices that also support these
features are interconnected with C 3050 LE via HDMI connection.
•
Use HDMI cable to connect HDMI eARC to corresponding HDMI
eARC port of TV. Use HDMI cable that has Ultra High-Speed HDMI
Certification Label to enjoy support for larger bandwidth and high
bitrate format.
•
With eARC connection established, C 3050 LE will output audio
signal from TV.
IMPORTANT
•
Ensure that the audio setting/format of eARC-connected devices to
C 3050 LE is set to PCM only.
•
Only audio output signal from TV is supported by HDMI eARC port.
•
There is no video output at HDMI eARC port of C 3050 LE.
CEC POWER
CEC Power allows the C 3050 LE to be powered up or down by an external
TV connected via HDMI eARC port.
Enable/Disable CEC Power
At operating mode, press and hold front panel HDMI button until HDMI
Source LED flashes.
Enabled - HDMI Source LED will flash twice.
Disabled - HDMI Source LED will flash once.
7 DIGITAL AUDIO IN (OPTICAL /COAXIAL)
•
Connect to the corresponding optical and coaxial digital output
of sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
REAR PANEL
22
15
16
9
Advertisement
Table of Contents
