SPECIFICATIONS POWER AMPLIFIER SECTION STEREO MODE CONTINUOUS AVERAGE POWER OUTPUT INTO 8 OHMS…….…………25W (Min. Power per channel, 20Hz-20kHz, both channels driven, with no more than rated distortion) Rated impedance……………………………………………………………….….4-8ohms Rated distortion (THD 20Hz-20kHz)………………….………………………….0.03% Clipping power (maximum continuous power per channel) ..…………………30W IHF dynamic headroom at 8 ohms………………….……………………………+2.4dB IHF dynamic power 8 ohms: ………………….…………………………..43W...
ALIGNMENT PROCEDURE A. OUTPUT OFFSET VOLTAGE 1.Push Power on, preheat unit for 5 minutes. 2.Connect the DC Millivoltmeter to L Channel speaker output terminals or TP5 and TP7, adjust VR301 to get a reading of 0V±30mV. 3.Connect the DC Millivoltmeter to R Channel speaker output terminals or TP6 and TP8, adjust VR401 to get a reading of 0V±30mV.
Page 10
REF. NO. PART NO. DESCRIPTION RESISTORS R717 07-90001-00T t= 90° Posistor R813×2 07-05082-06 1/6W Carbon Film Resistor R1, R617, R618, R619, R620, 07-05100-06 1/6W Carbon Film Resistor R815x2 R615, R616, R814×2 07-05330-06 1/6W Carbon Film Resistor R809×2 07-05680-06 1/6W Carbon Film Resistor R808×2 07-05221-06 1/6W...
Page 11
REF. NO. PART NO. DESCRIPTION R621 07-05102-06D 1/6W Metal Film Resistor R803×2 07-05222-06D 1/6W Metal Film Resistor R807×2, R819×2 07-05103-06D 1/6W Metal Film Resistor R120, R220 07-05393-06D 1/6W Metal Film Resistor R63, R64 07-01225-06D 1/6W Metal Film Resistor R801×2 07-01225-06D 1/6W Metal Film Resistor R303, R403...