NAD C3050 LE Owner's Manual page 16

REFERENCE
SPECIFICATIONS
GENERAL SPECIFICATIONS
MAIN IN, SPEAKER OUT
Continuous output power into 8 ohms and 4 ohms
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Clipping power
IHF dynamic power
Peak output current
Frequency response
Channel separation
Input sensitivity (for 100 W in 8 ohms)
Power consumption
• at Auto Standby ON and Network Standby OFF
• at Auto Standby ON and Network Standby ON
• OFF mode (Power switched OFF)
DIMENSION AND WEIGHT
Gross dimensions (W x H x D) ****
Net weight
Shipping weight
* - After 20 minutes of no user interface interaction and no active source input
** - With established wired or wireless network connection, wireless Bluetooth connectivity and no user interface interaction and no active source input for 15 minutes
*** - Supported services may vary over time. Inquire via support .bluos .net for updated list.
**** - Gross dimension includes feet, volume knob and extended front and rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features, please check out www .NADelectronics .com for the latest information about C 3050 LE.
16
100W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
<0.03% (250 mW to 100 W, 8 ohms and 4 ohms)
>95dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>115 W (at 1 kHz 0.1 % THD)
8 ohms: 180 W
4 ohms: 250W
2 ohms: 300 W
>20A (in 1 ohm, 1 ms)
±0.3 dB (20 Hz - 20 kHz)
>75dB (1 kHz)
>70dB (10 kHz)
540 mV
Digital: -6dBFS
0.5 W*
2.0 W**
0.1 W
435 x 110 x 355mm
17 1/4 x 4 3/8 x 14 inches
10 kg (22 lbs)
12.6 kg (27.8 lbs)