Table of Contents
Advertisement
Straight 2 of 5 Industrial Redundancy
If you are encountering errors when reading Straight 2 of 5 Industrial bar codes,
you may want to adjust the redundancy count. Redundancy adjusts the number of
times a bar code is decoded before transmission, which may reduce the number of
errors. Note that the higher the redundancy count, the longer it will take to decode
the bar code. To adjust the redundancy, scan the Straight 2 of 5 Industrial Redun-
dancy bar code below, then scan a redundancy count between 0 and 10 on the
Programming
Straight 2 of 5 IATA (two-bar start/stop)
<Default All Straight 2 of 5 IATA Settings>
Straight 2 of 5 IATA On/Off
Straight 2 of 5 IATA Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 1-48. Minimum Default = 4, Maximum Default = 48.
Minimum Message Length
94
Chart. Then scan the Save bar code. Default = 0.
On
(page 80) for additional information. Minimum and Maximum lengths
Straight 2 of 5 Industrial
Redundancy
HF52X Fix Mount Barcode Scanner User Guide
* Off
Message Length
Advertisement
Table of Contents
