Table of Contents
Advertisement
Map display
If the pictogram mode is active, use the
map display mode. The map orientation depends on the scale
selected. It is rotated to follow the direction of driving for all scale
values up to 20 km; for all other scales as of 20 km, the map is
orientated towards the destination. Use
The following information is shown on the map:
-
the calculated route (blinking)
-
the current vehicle location
scale, also the destination
-
the currently used road (bottom)
-
the real distance to the destination (top left corner)
-
the selected scale (top right corner)
-
a menu bar on the left showing the distance to the destination
These menu items can be switched on and off in the DSC menu
under Map info.
-
for approximately 5 secs. the name of the road to turn into (top).
This indication will be displayed once again by repeating the
voice output.
-
a coloured road map
or
button to switch to the
/
to alter the scale.
and, depending on the selected
travel time
driving recommendation
compass
GPS status
direction to the destination
52
Advertisement
Table of Contents
