4.3 Automatic Tracking Aid ARP-10
Necessary parts
Table 4-3 Contents of ARP-10 installation kit ARP-10-A (Code No.: 000-086-996)
ARP-10 Board
Cable Assy.
Spacer
Toroidal Core
Cable Tie
Panhead Screw
1. Unfasten eight screws to remove the cover.
2. Fasten four spacers to the locations shown in Figure 4-11.
3. Fasten the ARP-10 Board to the spacers with four panhead screws.
4. Attach the cable assy. between J1 on the ARP-10 Board and J1107 on the
SPU Board. Attach toroidal core to cable assy. and fasten cable assy. with
cable tie.
5. Fasten the cover.
Name
18P9007
80-0633
SQ-10
TFC-25-25-12
CV-150
M3X8
Figure 4-11 Display unit, right side view
Type
Qty
1
008-478-300
1
4
000-801-678
1
000-129-693
1
000-570-325
4
000-881-404
Code No.
4-11