Table of Contents
Advertisement
7. With a level, check the dryer, and make necessary adjustments to the leveling legs. Once
level, tighten the leveling leg locking nuts with a wrench.
8. The dryer door direction can be reversed.
1. If the dryer is plugged in, unplug the dryer from the electrical service.
2. Remove the hinge hole covers and crews. Move the door catch cover to the
opposite side.
3. While supporting the door, remove 2 screws in the hinges that secure the hinges
to the cabinet.
4. Remove door by lifting slightly at hinges and puIling the hinge tabs out of the
hinge slots.
5. Move the following parts to the opposite side of the of the door: 2 hinges and
4 hinge screws, 4 door screws, door strike and screw, inner door cover plate
and screw.
6. Attach the door to the opposite side of the cabinet using the 2 counter sunk hinge
screws (See below).
7. Driving the lower hinge screw first will help to align the door and hinges.
8. Replace the hinge hole covers and screws in the opposite side.
Hide quick links:
Advertisement
Table of Contents
