Table of Contents
Advertisement
3. Loosen the leveling locking nuts and install the vinyl feet.
4. Set the dryer back in an upright position.
5. Review the exhaust section in the previous section before installing the exhaust system.
Install the ductwork from the dryer to the exhaust hood. The crimped end of the duct sec-
tions must point away from the dryer. DO NOT use sheet metal screws when assembling
ducting. These joints should be taped. Never use plastic flexible exhaust material.
Tip for tight installations:
install a section of exhaust system to the dryer before moving the
dryer in place. Use duct tape to secure this section to the dryer but do not cover louvers in
dryer cabinet.
k ItSJ
Hide quick links:
Advertisement
Table of Contents
