Installation - Maytag MDE2600AYW Installation Instructions Manual

CANADIAN MODELS
All Canadian models are shipped with the power cord attached.
NOTE: It is not permissible to convert a dryer in Canada to 208 volts.
ADDITIONAL INFORMATION - 50 HERTZ OPERATION
This Maytag dryer model is manufactured for operation on 60 Hz AC approved electrical
service. This model is not designed for use on 50 Hz AC electrical service and conversion of
the product from 60 to 50 HZ operation is not recommended. For additional infomlation on
50 Hz products, write
MAYTAG INTERNATIONAL, INC.
8700 BRYN MAWR AVE.
CHICAGO, IL 60631
Phone 773-714-0100
INSTALLATION ACCESSORIES
- Vent Hood - 4" (10.16 cm) opening
- Aluminum Pipe - 4" x 24" (10.16 cm x 60.96 cm) ,
- Aluminum Elbow - 4" (10.16 cm)
- Aluminum Window Plate - 15" x 20" (38.10 cm x 50.80 cm) - 4" (10.16 cm) hole
- Exhaust Deflector Kit. (U.S. Electric Models Only)
- Flexible Aluminum Vent Duct - 4" (10.16 cm diameter - 38" (81.28 cm) length stretches to
8' (2.44 cm)
- Clamp for Flexible Aluminum Duct
- Exhaust Duct Kit for Base or Left Side Exhausting
- Dacron Lint Bag
- Bracket for Exhaust Deflector
Rectangular Vent Kits
- Natural to LP Conversion Kit
- LP to Natural Conversion Kit
- Anchor Bracket Kit
- Heating Element Conversion Kit.
- Exhaust Kit
- Grounding Kit