Number Of Rings - AT&T EL52513 User Manual

Answering system
Answering system settings

number of rings

You can set the answering system to answer an incoming call after 2, 3, 4, 5,
or 6 rings. You can also select Toll saver, which is explained below. Unless
you change it, the answering system answers an incoming call after
three rings.
To set the number of rings:
Press mEnU/
1.
main menu.
2. Press or
CID
then press
mEnU
3. Press or
CID
then press
mEnU
4. Press or
CID
/SElECT.
mEnU
5. Press or
CID
2, 3, 4, 5, 6 or Toll saver.
• Toll saver- the answering system answers a call after two rings if
you have new messages, and after four rings when there are no new
messages. This feature allows you to check for new messages and avoid
paying long distance charges if you are calling from out of your local area.
/SElECT to save your setting.
6. Press
mEnU
note: If you subscribe to a voicemail service offered through your telephone service
provider, see Answering system and voicemail indicators on page 57.
in idle mode to enter the
SElECT
to scroll to Answering sys,
DIR
/SElECT.
to scroll to Ans sys setup,
DIR
/SElECT.
to scroll to # of rings, then press
DIR
to scroll and choose among
DIR
53
# of rings
ECO
3
ECO