Save A Caller Id Log Entry To The Directory - AT&T EL52513 User Manual

Caller ID
Caller ID operation

Save a caller ID log entry to the directory

1. While reviewing the caller ID log, press
caller ID log.
2. Press /SElECT. The screen shows Edit number.
mEnU
3. Use the dialing keys to modify the telephone number (up to 30 digits).
• Press
CID
• Press and hold
(a P appears).
• Press
mUTE
• Press and hold
/SElECT to save the number in the display. The screen shows
4. Press
mEnU
Edit name.
Use the dialing keys and refer to Character chart on page 33 to modify
5.
the name (up to 15 characters).
Press 0 to add a space.
•
• Press
CID
• Press
mUTE
• Press and hold
6. Press /SElECT to save. The screen shows Saved with a confirmation tone.
mEnU
notes:
The screen shows number repeated if the number is already in the directory. You cannot
•
save the same number more than once.
• If the directory is full, the screen shows Directory full.
• If you try to save a caller ID log entry to the directory without a number,
Unable to save displays.
• If the telephone number has more than 15 digits, only the last 15 digits appear in the
caller ID log. However, the telephone can still save all digits (up to 24 digits) of that
telephone number from the caller ID log in the directory.
• You might need to change how a caller ID number is saved in the directory if the entry does
not appear in the correct format. Caller ID numbers might appear with an area code that
is not necessary for local calls, or without a 1 that is necessary for long distance calls. For
details, see view dialing options on page 45.
or to move the cursor to the left or right.
DIR
/PAUSE to enter a 3-second dialing pause
REDIAl
/DElETE to erase a digit.
/DElETE to erase all digits.
mUTE
or to move the cursor to the left or right.
DIR
/DElETE to erase a character.
/DElETE to erase all characters.
mUTE
or
CID DIR
47
to browse through the