Speaker Setup - Marantz SR4500 User Manual

Marantz sr4500: user manual
Hide thumbs Also See for SR4500:
Table of Contents

Advertisement

5.
If you finish these setup, press the
or
cursor button to select "TO MAIN MENU" then
press the ENTER button to return the SETUP
MENU.
Or press the
or
cursor button to select
"EXIT" then press the ENTER button to exit
the SETUP MENU.
Notes:
• When a DTS-LD or DTS-CD is playing, this setup
is not available. This is to avoid noise being
generated from the analog input.
• If "Dx-AUTO" is selected and a DVD, compact
disc or LD is fast forwarded during playback,
decoded signals may produce a skipping sound. In
such cases, change the setting to DIGITAL.
• Same digital input function cannot be set. In this
case, the previous setting is set to ANALOG. Same
digital input number cannot be set in Digital AUTO
mode and Digital Fixed mode. For example,
D1AUTO and DIG.1 are not set at same time.
• The TUNER is fixed to the analog input, and can
not be selected for any digital input.

2. SPEAKER SETUP

After you have installed the SR4500, connected all
the components, and determined the speaker layout,
it is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for
your environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:
2-1. SPEAKERS SIZE
When setting the speaker size in the SPEAKER
SIZE sub-menu, use the guidelines given below.
Large:
The complete frequency range for the channel
you are setting will be output from the speaker.
Small:
Frequencies of the channel you are setting
lower than approx. 100Hz will be output from the
subwoofer.
If the Subwoofer is set to "NONE" and the front
speakers are set to "Large," then the sound may
be output from both the left and right speakers.
18
SR4500U DFU_01_ENG 2_2
Page 18
1. 3. 5.
4. 5.
2. 5.
ND RECEIVER SR4500
SURROUND
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ATT
ANALOG
DIGITAL
SLEEP
AUTO
SURR
DIRECT
DISC 6.1
MTX 6.1
EQ
DIGITAL
L
C
R
AAC
PCM
LFE
SL
S
SR
D
SURROUND
PURE
SIMPLE
MODE
DIRECT
SETUP
DISPLAY
MEMORY
CLEAR
EAKER
ENTER
AUTO
HT-EQ
MENU
EXIT
BAND
T-MODE
NES
TV
MAIN
4. 5.
VOL.
SLEEP
MUTE
VOL.
OSD
MENU
1. 3. 5.
ENTER
2. 5.
SET UP/
MENU OFF
T.TONE
PURE DIRECT
AUTO
DTS
1.
Select "2.SPEAKER" in SETUP MENU with
or
cursor button,
2.
Press the ENTER button to enter the menu.
The first sub-menu item is "2-1.Speakers Size"
setup.
3.
Press
or
cursor button to select the each
speaker.
4.
Press
or
cursor button to select the setting
of size to each speaker.
5.
If you finish these setup, press the
or
cursor button to select "NEXT".
6.
Press the ENTER button to enter the next "2-
2. Speakers Distance" setup.
Or press the
or
cursor button to select
"EXIT" then press the ENTER button to exit
the SETUP MENU.
Or press the
or
cursor button to select "TO
MAIN MENU" then press the ENTER button to
return the SETUP MENU.
MENU STRUCTURE of Speakers Size setup
MENU STRUCTURE of Speakers Size setup
Speakers
Size
2-1. SPEAKERS SIZE
SUBW
YES
setup
NONE
L & R
LARGE
SMALL
CENTER
SMALL
LARGE
NONE
SL & SR
SMALL
LARGE
NONE
SB
1CH
2CH
NONE
SB SIZE
SMALL
LARGE
***
LPF/HPF
80
100
120
TO MAIN
NEXT
EXIT
Speakers Distance
exit SETUP
setup
MENU
04.6.25, 11:06 AM
Adobe PageMaker 6.5J/PPC
Select when a subwoofer is connected.
Select when a subwoofer is not connected.
Select if the front speakers are large sized.
Select if the front speakers are small sized.
Select if the center speaker is small sized.
Select if the center speaker is large sized.
Select if no center speaker is connected.
Select if the surround left and right speakers are small sized.
Select if the surround left and right speakers are large sized.
Select if no surround left and right speakers are connected.
Select if the surround back speaker is connected
Select if the surround back left and right speakers are connected
Select if no surround back speaker is connected
Select if the surround back speaker(s) is small sized
Select if the surround back speaker(s) is large sized
This menu (SB SIZE) will not be displayed, if SB is set "NONE".
Select this when the bass speaker is about 12cm(4 3/4inches)
Select this when the bass speaker is about 10cm(3 15/16inches)
Select this when the bass speaker is about 8cm(3 3/16inches)
MENU
MAIN MENU

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents