7.1 Ch Input Level - Marantz SR4500 User Manual

3.
If it is necessary to adjust the output level of
each channel, press the CH.SEL button on the
remote.
Adjust the speaker output levels so that you
can hear the same sound level from each
speaker at the listening position. For the front
left, front right, center, surround left, surround
right and surround back speakers, the output
levels can be adjusted between –10 to +10 dB.
The subwoofer can be adjusted between –15
and +10 dB.
These adjustments result will be stored to 7.1
CH. INPUT memory.
4.
Adjust the main volume with the MAIN VOLUME
knob or the VOL buttons on the remote.
To cancel the 7.1 CH. INPUT setting, press the 7.1
CH INPUT button on the front panel or press 7.1
CH IN on the remote.
Notes:
• When the 7.1 CH. Input is in use, you may not
select a surround mode, as the external decoder
determines processing.
• In addition, there is no signal at the record outputs
when the 7.1 CH. Input is in use.
SR4500U DFU_01_ENG 2_2 Page 29

7.1 CH INPUT LEVEL

This menu is to adjust the speaker levels for 7.1-
channel input sources.
Here you will adjust the volume for each channel
so that they are all heard by the listener at the
same level.
1. 3. 5. 4. 5.
2. 5.
ND RECEIVER SR4500
SURROUND
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ATT ANALOG
DIGITAL DIGITAL
SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ
L C R
AAC PCM LFE
SL S SR
D
SURROUND PURE SIMPLE
MODE DIRECT SETUP DISPLAY MEMORY CLEAR
EAKER
ENTER
AUTO HT-EQ MENU EXIT BAND T-MODE
NES
4. 5. TV MAIN
VOL. SLEEP MUTE VOL.
OSD MENU
1. 3. 5.
ENTER
2. 5.
SET UP/
MENU OFF
T.TONE
PURE DIRECT AUTO DTS
1.
Press the CH.SEL button on the remote to
enter this menu.
2.
Press or cursor button to select desired
channel.
3.
Using the or cursor button, adjust the
volume level of each channel.
Maximum
+10dB
+9dB
button
1 dB interval
Reference
0dB
1 dB interval
button
-9dB
Minimum -10dB
Notes:
• When no operation is taken for 5 seconds, the
level setup mode will be cancelled.
• The condition of these setup will be memorized to
7.1CH INPUT source.
MENU STRUCTURE of 7.1CH INPUT LEVEL setup
MENU STRUCTURE of 7.1CH IN setup
7.1-L >-10>...>0>...>+10db
7.1-C >-10>...>0>...>+10db
7.1-R >-10>...>0>...>+10db
7.1-SR >-10>...>0>...>+10db
7.1-SBR >-10>...>0>...>+10db
7.1-SBL >-10>...>0>...>+10db
7.1-SL >-10>...>0>...>+10db
7.1-SW >-15>...>0>...>+10db
04.6.25, 11:08 AM Adobe PageMaker 6.5J/PPC
29