Setting Auto Tray Switching Control - Xerox 770 Digital Color Press System Administration Manual

System Settings > Common Service Settings
13. Exit administrator mode.

Setting Auto Tray Switching Control

1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select System Settings > Common Service Settings.
4. Select Paper Tray Settings.
5. Select Auto Tray Switching Control.
The Auto Tray Switching Control screen is displayed.
6. Select Auto Tray Switching.
a) Select Change Settings.
b) Select either Enable during Auto Paper Select or
Enable for Same Paper Type, Weight and Color.
c) Select Save.
The Auto Tray Switching Control screen is displayed.
7. Select Targeted Type and Weight (Copy Jobs).
a) Select Change Settings.
b) Select the desired settings for the paper type (such as plain or coated) and for the
paper weight.
c) Select Save.
The Auto Tray Switching Control screen is displayed.
8. Select Targeted Paper Color (Copy Jobs).
a) Select Change Settings.
b) Select either All Colors or Selected Color Only.
c) If selecting Selected Color Only, select the desired color.
d) Select Save.
The Auto Tray Switching Control screen is displayed.
9. Select Targeted Type and Weight (Reports).
a) Select Change Settings.
b) Select the desired settings for the paper type (such as plain or coated) and for the
paper weight.
c) Select Save.
The Auto Tray Switching Control screen is displayed.
10. Select Targeted Paper Color (Reports).
a) Select Change Settings.
b) Select either All Colors or Selected Color Only.
c) If selecting Selected Color Only, select the desired color.
d) Select Save.
The Auto Tray Switching Control screen is displayed.
11. When finished, select Close.
The Paper Tray Settings screen displays.
2-22 ®
Xerox 770 Digital Color Press
System Administration Guide