Selecting The Reduce/Enlarge Presets; Other Settings - Xerox 770 Digital Color Press System Administration Manual

Selecting the Reduce/Enlarge Presets

1. Login as administrator.
2. Select System Settings > Scan Service Settings.
3. Select Reduce/Enlarge Presets.
The Reduce/Enlarge Presets screen displays.
4. Select the item to be set or changed.
5. Select Change Settings.
6. Follow the instructions on the UI to change the settings.
7. Select Save.
The previous screen is displayed.
8. If desired, select another feature to set or change and repeat the previous steps.
9. Select Close.
The main Tools tab screen is displayed.
10. Exit administrator mode.

Other Settings

The options here allow you to select the default settings including the following:
Memory Full Procedure
While scanning/copying an original, if there is insufficient space on the machine hard
disk, a screen appears. This screen asks the user how to handle the partially stored data.
If the user does not respond to this screen and a predetermined amount of time elapses,
then the machine will either cancel the job or run the partially scanned-in/copied job.
The setting selected here determines how the machine will handle that partially
scanned-in/copied job. Select one of two choices:
• Delete Job: The stored data is deleted from the machine's hard disk.
• Run Job: The scanned-in/copied data is treated as valid and complete, and the job
printed as is.
The amount of time that elapses between an error occurring and the way the machine
handles the partially scanned-in/copied job can be set for a specific amount with
Auto Job Release option (Machine Clock/Timers).
Maximum Stored Pages
Set the maximum number of pages stored for a copy document. You can set from 1
to 2000 pages.
Saturation
Select the amount of color saturation for scanned data. Selections include Pastel +2,
Pastel +1, Normal, Vivid +1, and Vivid +2.
®
Xerox 770 Digital Color Press
System Administration Guide
System Settings > Scan Service Settings
4-3