Back to Contents Page
Webcam
Dell Studio One 19/1909 Service Manual
Removing the Webcam
Replacing the Webcam
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as the computer stand).
Removing the Webcam
1. Follow the instructions in
Before You
2. Remove the system board (see
3. Remove the support assembly (see
4. Remove the two screws that secure the webcam to the LCD panel.
5. Disconnect the cable to the webcam.
6. Lift the webcam away from the LCD panel.
1
webcam cable
Replacing the Webcam
1. Follow the instructions in
Before You
2. Reconnect the cable to the webcam.
3. Replace the two screws that secure the webcam to the LCD panel.
4. Replace the support assembly (see
5. Replace the system board (see
Back to Contents Page
Begin.
Removing the System
Board).
Removing the Support
Assembly).
2
screws (2)
Begin.
Replacing the Support
Assembly).
Replacing the System
Board).