Close and connect the two fluff
9.
filters.
Install the two-piece fluff filter.
10.
Close the door.
11.
12.10 Condensate tank
During drying, condensation is
created that your appliance uses for
automatic cleaning. The condensed
water is collected at the factory in the
condensed water container of the
device.
Empty the condensate container
When the drying program has
finished or if the display shows a
message during use, empty the
condensed water container.
Requirements
sThe display shows after drying:
"end"
sor the display shows during
usage: .
Pull out the condensed water
1.
container horizontally.
Empty the condensed water container.
2.
Regularly check the filter of the
condensed water container
→ Page 40 and clean a
contaminated filter.
Make sure that the condensed
water container is pushed in before
using the device.
→ "Push in the condensate
container", page 32
ServiceNL
31