Table of Contents
Advertisement
NLTroubleshooting
Malfunction
Pump sound.
Buzzing sound.
Drying time is too long.
Water is leaking.
Laundry is too damp.
44
Cause and Troubleshooting
Condensate pump active.
No error - normal operating noise.
▶
Compressor venting active.
No error - normal operating noise.
▶
Fluff filter is dirty.
→
"Cleaning the fluff filter", Page 29
▶
Ambient temperature is higher than 30°C.
Make sure the ambient temperature is below 30°C.
▶
Ambient temperature is below 15°C.
Make sure the ambient temperature is above 15°C.
▶
Insufficient air circulation at the location of the
device.
Ventilate the installation site of the device.
▶
Ventilation opening of the device is blocked.
Make sure that the ventilation opening of the
▶
appliance is kept clear.
Heat exchanger is contaminated.
→ "Carrying out simple device maintenance on the
▶
device", page 35
Automatic self-cleaning flushes the heat exchanger
from the device.
No malfunction.
1.
Do not pull out the condensed water container.
2.
Do not abort the program.
3.
The appliance is not leveled properly.
→ "Adjusting the device", Page 13
▶
Inappropriate program set for the type of fabric.
Set a time program for post-drying.
▶
→ "Programs", Page 24
Power supply has failed.
Check whether the interior lighting or other
▶
appliances are working.
The load quantity is too high.
Pay attention to the maximum load of the
▶
→ "Programs", Page 24 .
Warm laundry feels damper than it actually is after
the program has ended.
Advertisement
Table of Contents
