Table of Contents
Advertisement
NLTroubleshooting
17 Troubleshooting
You can remedy minor faults on the device yourself. Before contacting customer
service, please refer to the troubleshooting information. This way you avoid
unnecessary costs.
WARNING
Risk of electric shock! Improper repairs
are dangerous.
Only trained specialist personnel may carry out repairs on the device.
▶
Only original spare parts may be used for repair of the device.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, its service agent or a similarly qualified person in order to avoid
a hazard.
Malfunction
"Hot" and drum
running.
Humping sound.
The display is off and
Start/ Refill
flashes.
"CrE"
Device not working.
42
Cause and Troubleshooting
Cooling process active.
No malfunction.
1.
Do not change the program during the cooling process.
2.
Remark:The cooling process takes up to 10 minutes.
You can continue to operate the device.
Compressor active.
No error - normal operating noise.
▶
The energy saving mode is active.
Press any button. aThe display
▶
lights up again.
After some time of use, the device automatically
recommends simple device care.
→ "Carrying out simple device maintenance on the
▶
device", page 35
Fluff filter is dirty.
→
"Cleaning the fluff filter", Page 29
▶
Mains plug of the power cable is not plugged in.
Connect the appliance to the mains.
▶
The fuse in the fuse box has tripped.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or other
▶
appliances are working.
Advertisement
Table of Contents
