Using Active Setup; Changing The Default Files - Magellan eXplorist 500 Reference Manual

Preferences

Using Active Setup

Whenever you need to access POIs, routes, and other saved data, the eXplorist automatically
goes to the default file for the particular piece of data you are working with. These default
locations may not meet your requirements as to where you are saving your data. You can use
the Active Setup portion of Preferences to change these defaults to more meet your
requirements.
In Active Setup, you can also choose which background map or detailed map you want to
use.
Changing the Default Folders
You can set the default for POI's, routes, and geocache files.
1. Press MENU.
Use the Arrow joystick to highlight Preferences.
2.
3. Press ENTER.
Use the Arrow joystick to highlight Active Setup.
4.
5. Press ENTER.
6. Use the Arrow joystick to highlight the field that you want to
change.
7. Press ENTER.
Use the Arrow joystick to select Select File or (POI, Route, Detail Map, etc.) File
8.
Off.
Note: Selecting File Off turns the default file off. When accessing the data for
items you have turned off, you will be taken to the top level folder for the particular
kind of data you are accessing. Background maps cannot be turned off.
9. Press ENTER.
10. If you selected Select File, using the Arrow joystick to highlight the file you want to
set as the default. When it is highlighted, press ENTER.
91