Using Active Setup - Magellan eXplorist XL Reference Manual

Magellan explorist xl: reference manual
Hide thumbs Also See for eXplorist XL:
Table of Contents

Advertisement

Preferences
12.
Date. Use the Arrow joystick to enter the present date. Push the Arrow
joystick up or down to change the value and left or right to move the
cursor.
Note: Date is also sent by the satellites and may already be correct as well.
13.
Press ENTER.
14.
Use the Arrow joystick to highlight Done.
15.
Press ENTER.
16.
The last viewed navigation screen is displayed and the eXplorist will begin
tracking satellites.

Using Active Setup

Whenever you need to access POIs, routes, and other saved data, the eXplorist automatically goes to the
default file for the particular piece of data you are working with. These default locations may not meet your
requirements as to where you are saving your data. You can use the Active Setup portion of Preferences to
change these defaults to more meet your requirements.
In Active Setup, you can also choose which background map or detailed map you want to use.
Changing the Default Folders
You can set the default for POI's, routes, and geocache files.
1.
Press MENU.
Use the Arrow joystick to highlight Preferences.
2.
3.
Press ENTER.
Use the Arrow joystick to highlight Active Setup.
4.
5.
Press ENTER.
6.
Use the Arrow joystick to highlight the field that you want to change.
7.
Press ENTER.
Use the Arrow joystick to select Select File or (POI, Route, Detail
8.
Map, etc.) File Off.
Note: Selecting File Off turns the default file off. When accessing the data for
items you have turned off, you will be taken to the top level folder for the
particular kind of data you are accessing. Background maps cannot be turned
off.
9.
Press ENTER.
If you selected Select File, using the Arrow joystick to highlight the file you want to set as the default.
10.
When it is highlighted, press ENTER.
73

Advertisement

Table of Contents
loading

Table of Contents