Magellan eXplorist 500 Reference Manual page 20

Starting Up
Enter Current Time. Use the arrow joystick to enter the current
time.
Arrow Joystick Up: Increases the highlighted number
Arrow Joystick Down: Decreases the highlighted number
Arrow Joystick Right: Moves the highlight one character to the right
Arrow Joystick Left: Moves the highlight one character to the left
Toggle between AM and PM by moving the arrow joystick up or down when
AM or PM is highlighted.
When you have entered the correct time, press ENTER.
Enter the Date. Use the Arrow joystick to set the date displayed
to the current date.
Arrow Joystick Up: Increases the highlighted number
Arrow Joystick Down: Decreases the highlighted number
Arrow Joystick Right: Moves the highlight one character to the right
Arrow Joystick Left: Moves the highlight one character to the left
When the month is highlighted, use the arrow joystick up or down to scroll
through the list of months.
When you have entered the correct date, press ENTER.
Accept Information. The Done button is highlighted at the
bottom of the display. Review the information you entered; if
correct, press ENTER.
Tip: If the time or the date is incorrect, you can fix it now.
Use the Arrow joystick to highlight the time or the date field
that you want to change. With the field highlighted, press
ENTER. You can now change the information using the same
technique used before.
The Satellite Status screen is displayed again and the eXplorist
will try to compute your position using the information you just
provided.
Tip: If you notice that the satellite signal-strength bars are
still not changing, try moving to a new location where you
have a clearer view of the sky.
As before, when the eXplorist computes the initial position, the
Map screen will be displayed, with your computed position
indicated by the arrow cursor in the middle of the display.
13
The latitude and longitude
that represents the center
of the region and area you
selected is displayed.