Table of Contents
Advertisement
Chapter 10
Key
Parameter
(admin
Setup
1
key)
(Continued)
(Continued)
Security
Configuration
1
[
] (admin key) can be accessed only when touchpanel A (basic control panel) is set.
2
This function is available with firmware version 1.04 or later.
The newest version can be downloaded from the support website.
support.brother.com
NOTE
• Some settings may differ depending on the firmware (printer software).
• If you want to reset the settings, use [Device settings] in the "Printer Setting Tool" to return
all settings to their factory defaults. For more information, see Device Settings on page 28.
Setting the Time and Date
Adjust the clock to the current time and date. This time and date is displayed in the main screen.
a
Press [
] (admin key).
b
Press [b], select [Setup], and then press [OK].
c
Press [b], select [Set Clock], and then press [OK]. The clock setting screen appears.
d
Press the number keys to specify the last two digits of the year, two digits for the month and
two digits for the day.
For December 1, 2013, press [1] [3] [1] [2] [0] [1].
e
Press [a] or [b] to select AM, PM or 24, and then press the number keys to specify two digits
each for the hour and minutes.
To enter 2:45 in the AM/PM format, press [b] to select [PM], and then press [c], then [0] [2]
[4] [5].
70
Set Temp
Default Time/Cont From
2
Time
Last
Disable
On/Off
Edit
Lock
On/Off
Settings
Admin
On/Off
Password
Enter Password:
**** (4 digits)
Printer/ProgVer/
FontVer/Memory
Settings
When directly entering the date/
time to be printed, select
whether or not the entered date/
time remains set after the copies
are printed.
This setting is applied until the
printer is turned off.
Select whether or not label
layouts can be edited.
Allow or disable setting changes
for [
Set password access for [
(admin key).
Type in the 4-digit password.
Displays the model name,
firmware version, font version
and amount of built-in memory.
Description
] (settings key).
]
10
Advertisement
Table of Contents
