Table of Contents
Advertisement
Chapter 3
To perform higher level security
settings:
When performing certificate verification
with EAP-FAST, PEAP, EAP-TTLS, or
EAP-TLS authentication methods, you
cannot specify the certificate from the
Network Setting Tool. After the printer is
set up to connect to the network, specify
the certificate by accessing the printer
from a web browser.
For more information on using a web
browser, see Change Printer Settings
Using Web Based Management
on page 43.
•
WEP Key
Specify a setting only when WEP is selected as
the encryption mode.
•
Passphrase
Specify a setting only when WPA3-SAE or
WPA/WPA2-PSK/WPA3-SAE is selected as
the authentication method.
•
User ID/Password
Specify these settings only when EAP-FAST,
PEAP, EAP-TTLS, or EAP-TLS is selected as
the authentication method.
With EAP-TLS, it is not necessary to register a
password, but a client certificate must be
registered. To register a certificate, connect to
the printer from a web browser, and then
specify the certificate.
•
Display the key and password on-screen
If you select this check box, keys and
passwords are displayed in plain (non-
encrypted) text.
26
Wireless Direct Tab
(TD-2125NWB/TD-2135NWB
only)
Wireless Direct Settings
•
SSID/Network Key Generation
Select the AUTO or STATIC option.
•
SSID (Network Name)/Network Key
Specify the SSID (25 ASCII characters or
fewer) and the Network Key (63 characters or
fewer) you want to use in the Wireless Direct
mode.
NOTE
- The default SSID and Password are as
follows:
• SSID: "DIRECT-*****_TD-2125NWB /
DIRECT-*****_TD-2135NWB" where
***** is the last five digits of the printer's
serial number.
• Password: 212***** (for TD-2125NWB)
213***** (for TD-2135NWB) where
***** is the last five digits of the printer's
serial number.
- The serial number label is located on the
base of the printer.
•
Channel
Specify the channel to use for the Wireless
Direct mode.
3
3
Advertisement
Table of Contents
