Table of Contents
Advertisement
5 Save Printer Print Log
Select whether nor not to save the printer's
print log. If [Disable] is selected, [Tools] -
[Save Print Log in File] cannot be performed.
Available settings: [Enable], [Disable]
6 Print Data after Printing
Select whether or not print data is erased
automatically after it is printed.
Available settings: [Erase All Print Data],
[Keep Print Data]
7 Bar Code*
Select whether or not margins are added
around barcodes.
Available settings: [With Margins],
[No Margins]
* If this parameter does not appear in the tab,
update the printer driver to the newest version.
The newest version can be downloaded from
the support website.
support.brother.com
Sensor Adjustment Tab
If Media Rolls are being used, it is
unnecessary to adjust the sensors.
1
2
3
4
1 Disable these settings
When this check box is clicked,
in the tab, and the settings can no longer be
specified or changed.
In addition, the settings in a tab where
appears will not be applied to the printer even
if [Apply] is clicked. To apply the specified or
changed settings to the printer, be sure to clear
the check box.
2 Media Sensor (Transmissive/Gap)
The following transmissive/gap sensor
parameters can be adjusted.
[Detection Sensitivity]
Adjust the precision of the sensor that detects
the gaps (spacing) for die-cut labels.
Available settings: -2–+2
[Luminescence Adjustment]
Adjust the amount of light emitted by the
transmissive/gap sensor.
Available settings: -2–+2
3 Media Sensor (Reflective/Bar)
The following reflective/black mark sensor
parameters can be adjusted.
[Mark Detection Sensitivity]
Adjust the precision of the sensor that detects
3
the black marks.
Available settings: -2–+2
[Luminescence Adjustment]
Adjust the amount of light emitted by the
reflective/black mark sensor.
Available settings: -2–+2
4 Media Sensor (Peeler) (TD-2125N/2135N/
2125NWB/2135NWB only)
This appears only if TD-2125N/2135N/
2125NWB/2135NWB is selected for [Printer].
Specify the settings when the label peeler
(optional) is used.
Adjust the precision of the sensor that detects
whether the label has been peeled.
Available settings: -2–+2
appears
Printer Setting Tool
31
3
Advertisement
Table of Contents
