Without Using A Wi-Fi Router/Access Point (Wireless Direct) - Brother TD-2020A User Manual

d
On the printer, simultaneously press
and hold the (Print),
and (Power) buttons until the
POWER indicator and STATUS
indicator blink in green alternately.
e
Release the (Feed) and
buttons (keep pressing the
(Power) button).
f
Change the connection mode by
pressing the (Print) button (keep
pressing the (Power) button). The
flashing indicator changes each time
you press the
toggling between connection mode.
g
Release the (Power) button when
both the POWER and Wi-Fi
indicators are lit in green:
• Using a Windows computer:
a. Launch the "Printer Setting
Tool" on your computer, and
click the Communication
Settings button.
b. Click the General tab, and in
the Selected Interface
section, select Wireless LAN.
c. Click the Wireless LAN tab
and in the Wireless Settings
section, select Infrastructure.
h
Launch the Printer Setting Tool on
your Windows computer, and click
the Communication Settings
button. Click the Wireless LAN tab
and select Wireless Settings. Type
the SSID that you wrote down in
step 2, or click Search and select the
SSID from the list that appears.
(Feed),
(Print)
(Print) button,
i
In the Passphrase field, type the
Password (Network Key).
NOTE
The information required here depends on
the authentication method and encryption
mode you are using; enter only the
information relevant to your network
environment.
j
Click Apply.
Both the POWER and the Wi-Fi indicators
will light in green when the connection
between the printer and your Wi-Fi router/
access point is established.
NOTE
To change any other network settings, use
the "Printer Setting Tool".
Without Using a Wi-Fi Router/
Access Point (Wireless Direct)
Wireless Direct allows you to connect the
printer to your computer or mobile device
directly, without a Wi-Fi router/access point.
The printer serves as a Wi-Fi access point.
a
Make sure that the printer is turned off.
b
Confirm the Wireless Direct settings of
the Printer.
• Using a Windows computer:
a. Connect the printer and computer
using a USB cable.
b. Launch the "Printer Setting
Tool" on your computer, and click
the Communication Settings
button.
c. Click the General tab and in the
Selected Interface section,
confirm that Wireless Direct is
selected.
Printing
2
2
15