IPv6
•
Static IPv6 Address
Specify a permanent IPv6 address.
•
Enable this address
Enables the specified static IPv6 address.
•
Primary DNS Server IPv6 Address/
Secondary DNS Server IPv6 Address
Specify the DNS server IPv6 addresses.
•
IPv6 Address List
Displays the list of IPv6 addresses.
Wired 802.1x Authentication
Configure IEEE 802.1x authentication.
•
Wired 802.1x Status
Enable or disable IEEE 802.1x authentication
for wired networks.
•
Authentication Method
Select the authentication method.
•
User ID/Password
With EAP-TLS, it is not necessary to register a
password, but you must register a client
certificate. To register a certificate, connect to
the printer from a web browser, and then
specify the certificate. You can also install the
authentication certificate in the Printer Setting
Tool using the menu bar: File > Install
Certificates.
Wireless Settings
•
Communication Mode
Displays the available communications modes.
•
SSID (Network Name)
Click Search to display available SSIDs.
•
Channel
Displays the automatically selected channel.
•
Authentication Method/Encryption Mode
The supported encryption modes for the
authentication methods are shown in the table
below.
Authentication
3
Method
Open System
Shared Key
WPA3-SAE
WPA/WPA2-PSK/
WPA3-SAE
EAP-FAST/NONE
EAP-FAST/
3
MS-CHAPv2
EAP-FAST/GTC
PEAP/MS-CHAPv2
PEAP/GTC
EAP-TTLS/CHAP
EAP-TTLS/MS-CHAP
EAP-TTLS/MS-
CHAPv2
EAP-TTLS/PAP
3
EAP-TLS
Printer Setting Tool
Encryption Mode
None
WEP
WEP
AES
TKIP + AES
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
25
3