Table 3 Other Dangers - Electrolux EUC40G1 Instruction Manual

During installation, there will be sufficient space
to restrict these dangers.
To fulfill these conditions, the areas and passages
around the machine must:
•
have no obstacle (e.g. ladder, tool, container,
box, etc.);
•
be clean and dry;
•
be well lit.
For complete customer information, the other
risks are given as follows. These actions are
incorrect. Therefore, they must be prohibited.
Application Stages:
Table 3
Potential
risks
Slipping or
Operators may be slipped due to water
falling
accumulation on the ground.
(U-M)
Operators intentionally or unintentionally
Scald
touch some internal parts without gloves
(U-M-P)
or when the parts are hot.
Operators touch a live part of the
Death due to machine when performing maintenance
electric if the switchboard is live. Operators lie
shock down on the wet floor for maintenance
(M) (an electric tool is used or the machine
power supply is not switched off)
Falling from Operators access the machine upper
the height part using improper tool (e.g. ladder or
(I-U-M) climbing) for maintenance.
Load When
Turnover accessories to move the machine or its
(I-M) package; when the load is unbalanced.
Exposure
Chemical (detergent, brightener, scale remover,
product etc.) without sufficient safety measures
(I-U-M-P) Please refer to label description and
safety information on the product.
Injury by
There is possibility of risk that an
pressing and
operator's hands are injured when the
cutting
cover is closed.
(I-U-M)
I =Installation, U =Normal use, M =Maintenance,
P = Clean
29
Other Dangers
Explain of hazards
using improper system
to chemical substance
or