G Start; G1.1 Checking Electrical And Pipelines; G1.2.2 Checking Arm Parts; G2 Start - Electrolux EUC40G1 Instruction Manual

G Start

G1 Preliminary Check,
Operation Test
Important Information!
These operations must be made by
professional
personnel
(safety shoes, gloves, glasses, etc.),
tools and proper auxiliary equipment.
G1.1 Checking Electrical and Pipelines
Before start:
•
Check correct connection of machine feeder
cables;
•
Ensure that the power supply voltage and
frequency consist with those data in Table 1;
•
Check correct connection of water supply
and drainage pipes (see E6 "Connection of
Pump Unit");
•
Ensure that all the guards and safety
equipment are kept in place and effective.
G1.2 Checking Position of Water Tank
Components
Important Information!
The following operations must be
made with
equipment (e.g. protective gloves,
etc.) and with machined stopped and
cooled down.
G1.2.1 Checking Pipe Joints of Filter and
Overflow Pipe
Ensure that the suction filter "2", lifting cup "3",
mini filter "4" and screen "4" are correctly
installed , when install the suction filter"2",need to
rotate clockwise until tight.(Figure 13).
Adjustment
technician
protective equipment
personnel protective
and
with

Figure 13 Filter, Overflowing Pipe and Washing Arm

G1.2.2 Checking Arm Parts

Ensure that both upper and lower washing arm,
and flushing arm are correctly installed (Figure
14).

G2 Start

•
Open the water supply valve;
•
Switch on the breaker "G" (electrically
connected);
•
Press lightly the power supply key of the
machine, see Table 2 ( " A " – " Control Panel " );
G3 Connection between Automatic Washer
and Quick-Dry Distributor
Important Information!
The pipes
distributor (detergent) and the quick-dry
agent distributor need regularly maintained
(once or twice a year at least) or will be
25

Figure 14 Checking Washing Arm

within the creeping pump