Table of Contents
Advertisement
F4 Instructions to Display and Operation
1.
Power on initialization:
After energization, it performs self-checking of
display and all the digital tubes are ON for 4 s and
the 3-color indicator light (red, green, and blue) is
respectively
ON
communication connection. If connection is
normal, the main washing temperature display
window shows "Sr-" and the rinsing temperature
display window shows "U--". Then, the digital
tube becomes dark. And, the unit' decimal point of
the rinsing temperature display window is
flickering, entering into the OFF state after
energization.
2.
Start the machine:
Press the power supply switch to start the
machine to enter into the operation state. The
main washing temperature display window shows
main washing temperature value.
temperature
display
temperature value.
3.
Description
of
indication：
3.1. State of water filling: The Start/Pause key is
permanently ON in yellow.
3.2. Standby state (state of door opened): The
Start/Pause key is flickering in green.
3.3. Standby state (state of door closed): The
Start/Pause key permanently ON in green.
3.4. State of washing: The Start/Pause key is
permanently ON in blue.
3.5. State of fault: The Start/Pause key is
flickering in red.
3.6. State of water drainage: The Start/Pause key
is OFF. Both the main washing temperature
display window and rinsing temperature
display window show " - - - , - - - " .
4.
Display of heating:
The unit' decimal point of the main washing
temperature display window is ON, indicating the
heating state of main washing. OFF: Not heated
The unit' decimal point of the rinsing temperature
display window is ON, indicating the heating state
of rinsing. OFF: Not heated
for
1
s.
Check
The rinsing
window
shows
3-color
indicator
5.
Selection of washing cycle time: Selection is
made in standby state.
Press the function key to select the washing cycle
time. If the LED1 is ON, select the washing cycle
time of 90 s. If the LED2 is ON, select the
the
washing cycle time of 120 s; If the LED3 is ON,
select the washing cycle time of 180 s
After stopping, start again the machine to
automatically enter into LED1 ON and select the
washing cycle time of 90 s.
Operating time of washing cycle: Washing cycle =
Washing time + 5s (pause time) + Rinsing time
(settable).
6.
Water drainage: In standby state (with door
closed), press the numerical digit DOWN key
to enter into the state of water drainage. After
the drainage is completed, the machine will
be automatically switched off.
rinsing
7.
Washing: In standby state (with door closed),
press the Start/Stop key to enter into the
washing state. In the washing state, press
light
again the Start/Stop key to stop washing
operation.
8.
Press the power supply key to switch on/off.
F5 DTC Display：
In case of fault, the machine must only normally
operate after troubleshooting with machine
stopped.
1.
Faulty sensor:
1.1. If the rinsing temperature sensor 1 (R1) is
faulty, the main washing temperature display
window shows "Er-". The rinsing temperature
display window shows " 001 " .
1.2. If the rinsing temperature sensor 2 (R2) is
faulty, the main washing temperature display
window shows "Er-". The rinsing temperature
display window shows " 002 " .
1.3. If the main washing temperature sensor (R3)
is faulty, the main washing temperature
display window shows "Er-". The rinsing
temperature display window shows " 003 " .
23
Advertisement
Table of Contents
