Quick Start Guide - Versecon - Water Cooled - York VERSECON YSWU Series Quick Start Up Manual

QUICK START GUIDE – VERSECON - WATER COOLED
This Quick-Start Guide indicates required field wiring
and minimum programming to provide proper unit
operation. This guide does not include required basic
installation practices discussed in the Installation,
Operation, and Maintenance manual, Form 145.05-
NOM1. The IOM should be reviewed to ensure all
proper procedures and safety precautions are followed
when installing the equipment.
In addition, any system alarms indicated by the User
Interface should be diagnosed as referenced in the
Installation, Operation, and Maintenance manual
– refer to Faults and Alarms in the Service section of
the manual.
JOHNSON CONTROLS
This Quick-Start Guide is indexed according to unit
type and options. Units are categorized as either
Constant Volume, Variable Air Volume, or FlexSys.
Refer to the applicable section for the required wiring
and programming.
References to "Programming" indicates the setpoints
that should be programmed/verified, under the
"Setpoints" section of the User Interface.
Unit options should be programmed based on the unit
configuration ordered from the factory.
FORM 145.05-SU2 (1207)
5