Table of Contents
Advertisement
TECHNICAL GUIDE
SPLIT-SYSTEM AIR CONDITIONERS
10 SEER
MODELS:
H*RA018 THRU 060
(1.5 THRU 5 NOMINAL TONS, 1 PH)
H*RA036 THRU 090
(3 THRU 7.5 NOMINAL TONS, 3 PH)
MODELS: 018 - 060 (1 PH & 3 PH)
This product was manufactured
Certification applies only
in a plant whose quality system
when the complete
is certified/registered as being
system is listed
in conformity with ISO 9001.
Due to continuous product improvement, specifica-
tions are subject to change without notice.
Visit us on the web at www.york.com for the most
up-to-date technical information.
Additional rating information can be found at
www.ariprimenet.org.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
®
MODELS: 076 - 090 (3 PH)
R
P
LISTED
with ARI.
DESCRIPTION
The 10 SEER Series condensing unit is the outdoor part of a
versatile system of air conditioning. It is designed to be cus-
tom-matched with one of UPG's complete line of evaporator
sections, each designed to serve a specific function. Match-
ing Air Handlers are available for upflow, downflow or hori-
zontal applications to provide a complete system. Electric
Heaters are available if required. Add-On coils are available
for use with upflow, downflow or horizontal furnaces and air
handlers.
WARRANTY
Single Phase Units:
5-year limited parts warranty.
5-year limited compressor warranty.
Three Phase Units:
1-year limited parts warranty.
5-year limited compressor warranty.
FEATURES
• QUALITY CONDENSER COILS - The coil is constructed
of enhanced copper tube and aluminum fins.
• COIL PROTECTION - Coils are protected from damage by
a polymer mesh applied between the coil face, and a PVC
coated steel coil guard.
• PROTECTED COMPRESSOR - The compressor is inter-
nally protected against high pressure and temperature.
This is accomplished by the simultaneous operation of
high pressure relief valve and a temperature sensor which
protects the compressor if undesirable operating condi-
tions occur. A liquid line filter-drier further protects the
compressor.
• DURABLE FINISH - The cabinet is made of pre-painted
steel. The pre-treated flat galvanized steel provides a bet-
ter paint to steel bond, which resists corrosion and rust
creep. Special primer formulas and matted desert sand fin-
ish insure less fading when exposed to sunlight.
• LOWER INSTALLED COST - Installation time and costs
are reduced by easy power and control wiring connec-
tions. Discharge line heat exchanger knockouts are pro-
vided, if required. Available in sweat connect models only.
The unit contains enough refrigerant for matching indoor
coils and 15 feet of interconnecting piping. The small base
dimension means less space is required on the ground or
roof.
• TOP DISCHARGE - The warm air from the top mounted
fan is blown up away from the structure and any landscap-
ing. This allows compact location on multi-unit applica-
tions.
• LOW OPERATING SOUND LEVEL - The upward air flow
carries the normal operating noise up away from the living
area. The rigid top panel effectively isolates any motor
sound. Isolator mounted compressor and the rippled fins
of the condenser coil muffle the normal fan motor and
compressor operating sounds.
• LOW MAINTENANCE - Long life permanently lubricated
motor-bearings need no annual servicing.
• EASY SERVICE ACCESS - Fully exposed refrigerant con-
nections, a single panel covering the electrical controls
and the molex plug in the control box connecting the con-
denser fan, make for easy servicing of the unit.
• SECURED SERVICE VALVES - Secured re-usable ser-
vice valves are provided on both the liquid and vapor
sweat connections for ease of evacuating and charging.
• U.L. and C.U.L. listed - approved for outdoor application.
Certified in accordance with the Unitary Small Equipment cer-
tification program, which is based on ARI Standard 210/240.
036-21121-002 Rev. B (0103)
Advertisement
Table of Contents
Related Manuals for York H1RA018S06
Summary of Contents for York H1RA018S06
- Page 1 • SECURED SERVICE VALVES - Secured re-usable ser- Visit us on the web at www.york.com for the most vice valves are provided on both the liquid and vapor up-to-date technical information.
-
Page 2: Physical And Electrical Data 1 Phase
036-21121-002 Rev. B (0103) Physical and Electrical Data - 1 Phase MODEL H1RA018S06 H1RA024S06 H2RA030S06 H2RA036S06 H1RA042S06 H1RA048S06 H3RA060S06 Unit Supply Voltage 208/230 – 1 – 60 187 to 252 Normal Voltage Range Minimum Circuit Ampacity 12.5 15.6 17.5 21.5 26.1... -
Page 3: Table Of Contents
036-21121-002 Rev. B (0103) Additional R-22 Charge / Orifice Size for Various Matched Systems - 1 PHASE ADDITIONAL R-22 CHARGE / ORIFICE SIZE FOR VARIOUS MATCHED SYSTEMS H1RA018S06 H1RA024S06 H2RA030S06 H2RA036S06 H1RA042S06 H1RA048S06 H3RA060S06 Outdoor Unit Unit Orifice (s) 51,53,55... - Page 4 036-21121-002 Rev. B (0103) Additional R-22 Charge / Orifice Size for Various Matched Systems - 3 PHASE ADDITIONAL R-22 CHARGE / ORIFICE SIZE FOR VARIOUS MATCHED SYSTEMS Outdoor Unit H1RA036 H1RA042 H1RA048 H1RA060 H1RA076 H1RA090 Unit Orifice (s) 67, 71, 73 75, 78, 81 —...
- Page 5 UNIT MODEL NET MBH SEER RATED SEER ELECTRIC MODEL MODEL W/O TXV HEAT KW TOTAL SENS. + TXV 1 PH 10 SEER AC WITH N1AH / G2FD H1RA018S06 N1AHB0806 2,5,8,10 G2FD024(S,H)17 19.0 14.1 10.50 9.80 N1AHB0806 2,5,8,10 G2FD024(S,H)17 24.4 18.1 10.50...
- Page 6 G1FA024S14,17 18.0 13.3 10.00 9.20 G1FA030S14 19.0 14.1 10.50 9.80 G1HD024 18.5 13.7 10.50 10.00 G1NA024S17G 18.0 12.5 10.00 9.40 H1RA018S06 14,17 G1UA024S14,17 18.0 13.3 10.00 9.20 G1UA030S14 19.0 14.1 10.50 9.80 14,17 G2FD024(S,H)14,17 19.0 14.1 10.50 9.80 G2FD030(S,H)17 19.4 14.4...
- Page 7 036-21121-002 Rev. B (0103) COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils (Continued) FURNACE** COOLING COIL UNIT MODEL NET MBH CFM RANGE RATED SEER MODEL SEER + TXV (MIN.-MAX.) W/O TXV TOTAL SENS. 17,21 G1FA036S17,21 1200 33.6 24.9 10.00 9.10 21,24...
-
Page 8: Cooling Performance
4.18 32.3 4.63 27.0 4.94 68.5 17.7 1.67 14.9 1.88 12.8 2.04 68.5 43.6 4.21 36.7 4.73 31.4 5.14 H1RA048S06 H1RA018S06 H1RA048S(25,46) 76.0 19.3 16.7 1.92 14.2 2.11 76.0 47.6 4.26 41.1 4.84 34.9 5.32 84.0 20.8 1.70 18.5 1.96 15.9... - Page 9 036-21121-002 Rev. B (0103) ACCESSORIES* SOUND RATINGS* Refer to Price Manual for specific model numbers. SOUND UNIT MODEL RATINGS Hard Start Kit - Provides increased starting torque for areas DECIBELS with low voltage. Compressor Blanket - Designed to further reduce the nor- mal compressor operating sound.
- Page 10 036-21121-002 Rev. B (0103) TYPICAL FIELD WIRING - 1 Phase Application ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES POWER WIRING POWER WIRING 208/230-1-60 24 VOLT CONTROL WIRING CONTROL WIRING 230-1-50 MINIMUM 18 GA. WIRE FACTORY WIRING (NEC CLASS 2) FURNACE OR AIR HANDLER TERMINAL BLOCK...
- Page 11 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H1RA018S06 INDOOR COIL MODEL NO. G1FA024S14,17 ID CFM CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 20.6 19.7 18.1 20.7 19.8 18.5 20.8 19.8 18.9 S.C.
- Page 12 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H1RA024S06 INDOOR COIL MODEL NO. G1FA024S14, 17 ID CFM 1000 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 28.3 25.9 22.7 21.4 28.7 25.1 24.4 21.8 27.5 26.6 24.5...
- Page 13 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H2RA030S06 INDOOR COIL MODEL NO. G1FA036S17,21 ID CFM 1000 1200 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 33.9 31.1 28.7 25.6 34.4 31.5 29.1 26.0 34.7 31.8 29.4...
- Page 14 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H2RA036S06, H1RA036S(25,46) INDOOR COIL MODEL NO. G1FA036S17,21 ID CFM 1150 1250 1350 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 38.3 36.1 34.4 37.9 36.3 34.6 38.0 36.4 34.9...
- Page 15 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H1RA042S06, H1RA042S(25,46) INDOOR COIL MODEL NO. G1FA048S21 ID CFM 1200 1400 1600 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 47.2 44.1 41.2 47.5 44.6 41.9 47.9 45.1 42.6...
- Page 16 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H1RA048S06, H1RA048S(25,46) INDOOR COIL MODEL NO. G1FA048S21 ID CFM 1200 1400 1600 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 53.4 48.9 45.1 40.2 54.3 49.8 45.9 41.3 54.9...
- Page 17 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H3RA060S06 INDOOR COIL MODEL NO. G1FA060S21,24 ID CFM 2050 1800 1550 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 64.7 61.9 58.2 64.1 61.2 57.2 63.6 60.5 56.2 S.C.
- Page 18 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H1RA060S(25,46) INDOOR COIL MODEL NO. G2FD060S24A ID CFM 1450 1700 1950 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 61.2 58.5 56.3 61.8 59.1 56.9 62.3 59.6 57.5 S.C.
- Page 19 036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H1RA076S(25,46) INDOOR COIL MODEL NO. K4EV090 ID CFM 2100 2600 3100 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 79.1 76.3 73.9 82.0 79.2 76.9 84.9 82.0 79.9 S.C.
-
Page 20: Cooling Performance Data
036-21121-002 Rev. B (0103) COOLING PERFORMANCE DATA AIR CONDITIONER MODEL NO. H1RA090S(25,46) INDOOR COIL MODEL NO. K4EV090 ID CFM 2400 3000 3600 CONDENSER ENTERING AIR ID DB (°F) TEMPERATURE ID WB (°F) T.C. 104.2 97.2 90.1 108.1 100.5 92.8 112.1 103.8 95.5 S.C. - Page 21 036-21121-002 Rev. B (0103) MATCHING INDOOR COMPONENTS ADD-ON COILS - FOR FURNACE APPLICATIONS G1NA G1UA UNCASED G1HD 1/2 CASED UPFLOW HORIZONTAL DUCT UPFLOW G2FD* MULTI-POSITION G1FA (UPFLOW, HORIZONTAL FULL CASED G2FD090 is upflow only. AND DOWNFLOW) UPFLOW * Available with factory installed horizontal drain pan. AIR HANDLERS - FOR NON-FURNACE APPLICATIONS N1AH OR N1VS MODULAR BLOWER...
- Page 22 036-21121-002 Rev. B (0103) NOTES Unitary Products Group...
- Page 23 036-21121-002 Rev. B (0103) Unitary Products Group...
- Page 24 Subject to change without notice. Printed in U.S.A. 036-21121-002 Rev. B (0103) Copyright © by York International Corp. 2003. All rights reserved. Supersedes: 036-21121-002 Rev. A (0602) Unitary 5005 Norman Products York Group Drive 73069...