Restoring Factory Default Settings; About Upgrading; Upgrade Exclusions - One for All URC-8820 B00 User Manual

OFA 8L with Learning Owners Manual.fm Page 16 Monday, January 24, 2005 10:04 AM
O F A 8L U
NE OR LL NIVERSAL
3. Volume will again be independently
controlled according to its default
states for all programmed devices.
RESTORING FACTORY
DEFAULT SETTINGS
The One For All 8L Universal Remote
Control with Learning (URC-8820 B00)
includes a Setup Code Reset program. You
can use it to restore all your programmed
codes to factory settings and delete all
custom programming.
IMPORTANT: Executing this program erases
all code settings and all custom settings
including, Macros, Learned Keys,
Reassigned Device Keys, Keymoved Keys,
Favorite Channels, and all device settings.
1. On the remote control, press and hold
SET until the LED (red light) blinks
twice, then release SET.
Enter 9 8 0. The LED will blink four
2.
times.
3. Your remote is now ready for
programming.

ABOUT UPGRADING

The One For All 8L Universal Remote
Control with Learning (URC-8820 B00) has
the largest infrared code library available.
However, if you purchase a brand new home
entertainment or home automation device,
it may not respond to the codes stored in the
remote control's memory.
If this happens, please contact our Customer
Support department (see "Troubleshooting"
on page 17) to upgrade the remote control.
The Customer Support representative will
search our entire database for a code that
matches your device and instruct you how to

16 Restoring Factory Default Settings

R C L
EMOTE ONTROL WITH EARNING
enter it into your One For All 8L Universal
Remote Control with Learning (URC-8820
B00).
If the code for your home entertainment or
home automation device is not in our
database, we will need to "capture" the code
for that device from its original remote
control. A new code would then be created
and entered into your One For All 8L
Universal Remote Control with Learning
(URC-8820 B00). If necessary, the Customer
Support representative can instruct you how
to begin the capture procedure.
NOTE: One For All reserves the right to replace
a returned remote control with a new one of
equal or superior functionality.
U E
PGRADE XCLUSIONS
• Home entertainment or home
automation devices controlled by radio
frequency (RF/UHF), wired, or
ultrasonic remote controls. Only
devices controlled by infrared remote
controls are covered.
• Home entertainment or home
automation devices not controlled by
remote controls.
• Broken or defective product.
• Products that operate over 100 kHz.
• Infrared keyboards and infrared
pointing devices (such as mouse
substitutes).
• All products for sale and/or use outside
the continental United States, Hawaii,
Alaska, or Canada.