CTGAE3P 3021 manual booklet
CLEARING CUSTOM PROGRAMMING
The One For All 3 Device Universal Remote Control contains an
program. If desired, you can use it to clear custom program-
Feature Reset
ming, except your setup codes and reassigned device keys, and reset them
to original factory settings.Also see
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, and Volume Lock.
1.
2.
RESTORING FACTORY DEFAULT SETTINGS
The One For All 3 Device Universal Remote Control also contains a
program that you can use to reset all custom settings and setup codes
Reset
to original factory settings.Also see
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, Volume Lock, Reassigned Devices, and all
device settings.
1.
2.
Restoring Factory Default Settings
Press and hold
until the
SET
then release
.
SET
Enter
-
-
. The
9
8
0
LED
trol will return to normal operation.
Clearing Custom Programming
Press and hold
until the
SET
then release
.
SET
Enter
-
-
. The
9
8
1
LED
trol will return to normal operation.
14
5/24/04
12:46 PM
(red light) blinks twice,
LED
will blink twice. The remote con-
(red light) blinks twice,
LED
will blink twice. The remote con-
Page 14
Operational
below.
Factory
above.