CTGAE4P 4021 manual booklet
2.
3.
CLEARING CUSTOM PROGRAMMING
The One For All 4 Device Universal Remote Control contains an
program.
Feature Reset
If desired, you can use it to clear custom programming, except your setup
codes and reassigned device keys, and reset them to original factory set-
tings.Also see
Restoring Factory Default Settings
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, and Volume Lock.
1.
2.
RESTORING FACTORY DEFAULT SETTINGS
The One For All 4 Device Universal Remote Control also contains a
program that you can use to reset all custom settings and setup codes
Reset
to original factory settings.Also see
IMPORTANT: Executing this program will erase all your custom settings for
Power Macro, Favorite Channels, Volume Lock, Reassigned Devices, and all
device settings.
1.
2.
Enter
-
-
and then press
9
9
3
blink four times.
Volume will again be independently controlled according
to its default states for all programmed devices.
Press and hold
until the
SET
then release
.
SET
Enter
-
-
. The
9
8
0
LED
will return to normal operation.
Clearing Custom Programming
Press and hold
until the
SET
then release
.
SET
Enter
-
-
. The
9
8
1
LED
will return to normal operation.
14
5/24/04
12:10 PM
L
once. The
VOL
as below.
(red light) blinks twice,
LED
will blink twice. The remote control
(red light) blinks twice,
LED
will blink twice. The remote control
Page 14
will
LED
Operational
Factory
as above.