Table of Contents
Advertisement
OFA 10L with Learning Owners Manual.fm Page 16 Thursday, January 27, 2005 1:34 PM
O
F
A
10L U
NE
OR
LL
NIVERSAL
U
V
C
NLOCKING
OLUME
ONTROL FOR A
S
D
(I
INGLE
EVICE
NDIVIDUAL
U
)
NLOCK
1.
After performing Global Volume Lock
(see left), press a desired mode key
where you want volume to be unlocked
(e.g., AUD) and controlled within its
own mode.
2.
Press and hold SET until the LED (red
light) blinks twice, then release SET.
3.
Enter 9 9 3 and then press VOL - once.
The LED will blink four times.
4.
If desired, repeat steps 1 through 3 (of
this section) for each device that you
want volume to be unlocked.
5.
Now, after you select a device that has
volume unlocked (e.g., AUD), pressing
VOL +, VOL -, or MUTE, will control the
device's volume only in its own mode.
U
A
V
C
NLOCKING
LL
OLUME
(
R
D
S
ESTORING
EFAULT
ETTING
NOTE: Performing these instructions will
restore independent volume control for all
programmed devices (e.g., TV volume control
in TV mode, VCR volume in VCR mode, etc.).
1.
On the remote control, press and hold
SET until the LED (red light) blinks
twice, then release SET.
2.
Enter 9 9 3 and then press VOL + once.
The LED will blink four times.
3.
Volume will again be independently
controlled according to its default
states for all programmed devices.
16 Restoring Factory Default Settings
R
C
EMOTE
ONTROL WITH
RESTORING FACTORY
V
DEFAULT SETTINGS
OLUME
The One For All 10L Universal Remote
Control with Learning (URC-10820 B00)
includes a Setup Code Reset program. You
can use it to restore all your programmed
codes to factory settings and delete all
custom programming.
IMPORTANT: Executing this program erases
all code settings and all custom settings
including, Macros, Learned Keys,
Reassigned Device Keys, Keymoved Keys,
Favorite Channels, and all device settings.
1.
On the remote control, press and hold
SET until the LED (red light) blinks
twice, then release SET.
2.
Enter 9 8 0. The LED will blink four
times.
3.
Your remote is now ready for
ONTROL
programming.
)
ABOUT UPGRADING
The One For All 10L Universal Remote
Control with Learning (URC-10820 B00) has
the largest infrared code library available.
However, if you purchase a brand new home
entertainment or home automation device,
it may not respond to the codes stored in the
remote control's memory.
If this happens, please contact our Customer
Support department (see "Troubleshooting"
on page 17) to upgrade the remote control.
The Customer Support representative will
search our entire database for a code that
matches your device and instruct you how to
enter it into your One For All 10L Universal
Remote Control with Learning (URC-10820
B00).
L
EARNING
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
