One for All URC-6200 Cinema 6+ User Manual

URC 6200
Cinema 6+

User Guide

FEATURES AND FUNCTIONS
Here are the features and functions of the Cinema 6
universal remote control. Use the drawing to locate each
feature of the remote, then refer to the chart for a descrip-
tion of what function each feature performs.
FEATURES AND FUNCTIONS
The Light (LED) flashes red to show that the
remote is working and is sending a signal.
The SETUP key is used to program your
Cinema 6 .
The POWER key controls power ON and OFF
the same as the POWER key on your original
remote. Please note that most CD Players do
not have an ON/OFF function on the original
remote control. If this is the case with your CD
Player, then POWER will have no effect on
your CD Player.
The TV, VCR, DVD/LD, RCVR, DVD/LD,
RCVR, CD OR CABLE/SAT, CD and CABLE/
SAT keys are used to select the home
entertainment component you want to control.
If your component does not respond when you
press a key on the remote control, press the
appropriate device key (TV, VCR,
DVD/LD, RCVR, DVD/LD, RCVR, CD OR
CABLE/SAT, CD or CABLE/SAT) first to tell
the remote control which component you would
like the remote to operate.
The VOL (Volume Up), VOL
Down) and MUTE keys control the volume the
same as the Volume Up and Down and Mute
keys on your original remote.
The CH (Channel Up) and CH
Down) keys change channels the same as the
Channel Up and Down keys on your original
remote. The CH /
following functions in other modes: DVD/LD
mode = Skip Forward/ Skip Reverse, RCVR,
and CD mode = Preset Up/Preset Down.
The Digit keys (0-9) control direct channel
0 - 9
0 - 9
access the same as the Digit keys on your
original remote. The Digit keys (0-9) also
control the following functions in other modes:
RCVR modes = Input Selections.
The ENTER key operates the same as the
Enter key on your original remote. If your
original remote control required you to use an
Enter key to change channels, use the ENTER
key on the Cinema 6 after entering your
channel number. The ENTER key also controls
the following functions in other modes: RCVR
modes = TAPE MON.
The PREV CH (Previous Channel) key
operates the same as the Last Channel or
Recall key on your original remote. The PREV
CH key also controls the following functions in
other modes: DVD/LD, RCVR and CD mode =
Random.
The CH / , VOL
Digit (0-9) keys are made of a phosphorescent
material that glows-in-the-dark. Expose the
keys to bright light to activate the glow-in-the-
dark feature. The length of time the keys
remain illuminated will be determined by the
0 - 9
0 - 9
length of time the remote is exposed to bright
light.
The SLEEP key accesses the Sleep Timer of
your home entertainment components (TV,
CABLE/SAT, RCVR and DVD/LD, RCVR, CD
OR CABLE/SAT modes only). Even if your
component does not have a Sleep Timer, the
Cinema 6 may access its own built-in sleep
timer.
The REW (Rewind), PL (PLAY), FF (Fast
Forward) REC (Record), STOP, and PAUSE
keys operate the same as the transport keys
on your original VCR, Laser Disc, DVD and CD
Player remote. As a safety feature of the
Cinema 6 , you must press the REC key twice
before recording.
The TV/VCR key operates the same as the TV/
VCR key on your original VCR remote. The TV/
VCR key also controls the following functions in
other modes: TV mode = TV/VIDEO, CBL/SAT
mode = A/B or TV/SAT, DVD/LD mode = TV/LD,
RCVR mode = Input Select, CD mode = A/B.
(Volume
(Channel
keys also control the
/ , MUTE, PREV CH and