Unit; Cntrl Port; Position Of Tsu Lt; Figure 5-6. Configuration Submenu - ADTRAN TSU LT User Manual

Chapter 5. Configuration Menu

Unit

CNTRL PORT

POSITION of TSU LT

5-6
The U S
NIT UBMENU
options.
Follow standard operating procedure to access the U
M items. See Figure 5-6.
ENU
Used to set the unit up as the master or slave on a chain of
units, and to initialize a modem and the control port data
rate.
Determines if this TSU LT is at the head of a chain of units
(directly connected to the modem or PC). The head of the
chain is referred to as the master unit. Units down the chain
are referred to as slaves or a slave unit. The setting of the
Position Selection
which case the head unit should be
cases, select
SLAVE
modem.)
Choices: MASTER, SLAVE
TSU LT User Manual
is used to change control port and alarm

Figure 5-6. Configuration Submenu

is necessary only when using a modem, in
. (The master is in charge of control of the
. For all other
MASTER
61202060L2-1
NIT