ADTRAN TSU LT User Manual page 37

Cancel
prior to pressing
inal data value is restored and the cursor returns to the sub-
menu field.
61202060L2-1
To Set the Data Field
Data fields that are available for editing are preceded by a
colon .
(:)
Step Action
Press
1 Enter
item number . The cursor moves to the data field, (to
the right of the submenu item name).
You can use the
value settings which display in the data field position one at
a time.
2 When the desired value is in the data field position,
press
Enter
The unit is set for the value shown in the data field and the
cursor moves back to the submenu item position indicating
the operation is complete. You can select another submenu
field or press
is available any time during the operation. If used
Enter
To View Display-Only Data Fields
An example of a D
selecting the following menu choices:
Step Action
1 Select
STATUS
Select submenu CURR ERR/ALM.
2
LOSS OF SIGNAL INACTIVE/ACTIVE
ing the current state of the alarm.
To Exit Any Menu Field Operation or Display
Press as many times as required to return to the
Cancel
desired menu level.
while the cursor is located on the submenu
and
Up Down Arrows
to set the value.
to return to the submenu.
Cancel
after making a data change, the orig-
O data field is found by
ISPLAY NLY
from the
MAIN MENU
TSU LT User Manual
Chapter 3. Operation
to scan the available
.
is displayed giv-
3-7