Figure 8-6. Clear Errors Screen - ADTRAN TSU LT User Manual

61202060L2-1
When completed, do the following:
Step
1 Use the
select
2 Press
menu
3 Use the
DS0
4 Press
Results: The TSU LT always checks for 511 errors.
The results of this check are shown under submenu
item 4 (see Figure 8-6).
When through viewing the results, do the following:
Step
1 Press
TEST PATTERN
2 Select
511 pattern generation.
Result: The far end remains in loopback until the
network
under submenu item
and
Up Down arrows
TEST PATTERN
to activate the T
Enter
and
Up Down arrows
S
to activate the selection.
Enter

Figure 8-6. Clear Errors Screen

to return to submenu item
Cancel
.
to terminate the test and the
NO PATTERN
REMOTE LOOPBK
REMOTE LOOPBK
TSU LT User Manual
Chapter 8. Example Operations
Action
or the
number 3
.
P
EST ATTERN
to select 511 ACT.
Action
is set to
NO LOOPBACK
.
to
sub-
8-5